lkml.org 
[lkml]   [2020]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 14/18] dt-bindings: usb: dwc3: Add Frame Length Adj restrictions
On Sun, Oct 11, 2020 at 01:41:17AM +0300, Serge Semin wrote:
> In accordance with the IP core databook the
> snps,quirk-frame-length-adjustment property can be set within [0, 0x3F].
> Let's make sure the DT schema applies a correct restriction on the
> property.
>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> ---
> Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> index 36d4b8060d7c..f1e6c3dab1ff 100644
> --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> @@ -226,6 +226,8 @@ properties:
> length adjustment when the fladj_30mhz_sdbnd signal is invalid or
> incorrect.
> $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 0x3f

It's fine if you add the constraints during the conversion.

>
> snps,rx-thr-num-pkt-prd:
> description: |
> --
> 2.27.0
>

\
 
 \ /
  Last update: 2020-10-13 14:39    [W:0.401 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site