[lkml]   [2020]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/3] drm/panel: mantix panel reset fixes

The first patch in this series fixes dereferencing a NULL mode in the error
path. The second one extends the resets to not only reset RESX but also TP_RSTN
since otherwise the display will stay completely blank. I didn't spot that
before initial submission since the reset line was bound to the touch
controller and although that failed to probe it came far enough to deassert the
reset line (at an arbitrary point in time during boot) and hence we got a
picture. Since touch and panel are on the same IC they're not completely
independent and i might have to turn the whole thing into an MFD at some point
but this series gets the panel to a reliably working state on boot and on fb

Since the reset-gpios are active low we can deassert in prepare and assert in
unprepare simplifying the code making sure lines are kept low when the
panel is off.

The binding were not part of a stable kernel so I hope it's okay to not worry
about backward compatibility.

Changes from v1:
- As per review comments by Fabio Estevam
- Fix typo in commit messages
- As per review comments by Rob Herring
- Don't use an array of reset lines

Guido Günther (3):
drm/panel: mantix: Don't dereference NULL mode
drm/panel: mantix: Fix panel reset
dt-binding: display: Require two resets on mantix panel

.../display/panel/mantix,mlaf057we51-x.yaml | 4 +++
.../gpu/drm/panel/panel-mantix-mlaf057we51.c | 25 +++++++++++++------
2 files changed, 21 insertions(+), 8 deletions(-)


 \ /
  Last update: 2020-10-13 12:33    [W:0.119 / U:2.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site