lkml.org 
[lkml]   [2020]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/18] dt-bindings: usb: dwc3: Add Tx De-emphasis restrictions
Date
In accordance with the driver comments the PIPE3 de-emphasis can be tunned
to be either -6dB, or -2.5dB or disabled. Let's add the de-emphasis
property restriction so the DT schema would make sure the controller DT
node is equipped with correct values.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index fe1b372fda80..36d4b8060d7c 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -145,6 +145,10 @@ properties:
The value driven to the PHY is controlled by the LTSSM during USB3
Compliance mode.
$ref: /schemas/types.yaml#/definitions/uint8
+ enum:
+ - 0 # -6dB de-emphasis
+ - 1 # -3.5dB de-emphasis
+ - 2 # No de-emphasis

snps,dis_u3_susphy_quirk:
description: When set core will disable USB3 suspend phy
--
2.27.0
\
 
 \ /
  Last update: 2020-10-11 01:14    [W:0.294 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site