lkml.org 
[lkml]   [2020]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 RESEND 7/9] spi: spi-s3c64xx: Ensure cur_speed holds actual clock value
Date
Make sure the cur_speed value used in s3c64xx_enable_datapath()
to configure DMA channel and in s3c64xx_wait_for_*() to calculate the
transfer timeout is set to the actual value of (half) the clock speed.

Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
---
drivers/spi/spi-s3c64xx.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 02de734b8ab1..89c162efe355 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -626,6 +626,7 @@ static int s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
ret = clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
if (ret)
return ret;
+ sdd->cur_speed = clk_get_rate(sdd->src_clk) / 2;
} else {
/* Configure Clock */
val = readl(regs + S3C64XX_SPI_CLK_CFG);
--
2.26.2
\
 
 \ /
  Last update: 2020-10-01 17:23    [W:0.365 / U:1.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site