lkml.org 
[lkml]   [2020]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 4/4] net: dsa: Utilize __vlan_find_dev_deep_rcu()
Date
Now that we are guaranteed that dsa_untag_bridge_pvid() is called after
eth_type_trans() we can utilize __vlan_find_dev_deep_rcu() which will
take care of finding an 802.1Q upper on top of a bridge master.

A common use case, prior to 12a1526d067 ("net: dsa: untag the bridge
pvid from rx skbs") was to configure a bridge 802.1Q upper like this:

ip link add name br0 type bridge vlan_filtering 0
ip link add link br0 name br0.1 type vlan id 1

in order to pop the default_pvid VLAN tag.

With this change we restore that behavior while still allowing the DSA
receive path to automatically pop the VLAN tag.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
net/dsa/dsa_priv.h | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index d6ce8c2a2590..12998bf04e55 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -204,7 +204,6 @@ static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)
struct net_device *br = dp->bridge_dev;
struct net_device *dev = skb->dev;
struct net_device *upper_dev;
- struct list_head *iter;
u16 vid, pvid, proto;
int err;

@@ -246,13 +245,9 @@ static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)
* supports because vlan_filtering is 0. In that case, we should
* definitely keep the tag, to make sure it keeps working.
*/
- netdev_for_each_upper_dev_rcu(dev, upper_dev, iter) {
- if (!is_vlan_dev(upper_dev))
- continue;
-
- if (vid == vlan_dev_vlan_id(upper_dev))
- return skb;
- }
+ upper_dev = __vlan_find_dev_deep_rcu(br, htons(proto), vid);
+ if (upper_dev)
+ return skb;

__vlan_hwaccel_clear_tag(skb);

--
2.25.1
\
 
 \ /
  Last update: 2020-10-02 04:43    [W:0.115 / U:3.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site