lkml.org 
[lkml]   [2020]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V4 0/5] Add minimal boot support for IPQ6018
Date
The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers,
Gateways and Access Points.

This series adds minimal board boot support for ipq6018-cp01 board.

[v4]
* Addressed review comments in pinctrl bindings from Rob.
* Ran make dt_binding_check and no issues was reported.
* Deleted absahu email id from patch 4, since its bouncing now.
* Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
dependency with,
https://lkml.org/lkml/2020/1/9/84

[V3]
* Removed clock driver and bindings from this patch series, and added them
as a different series.
* Removed qpic_padN from pinctrl driver.
* Addressed review comments in dts, and added the remaining fixed clocks their
* Fixed review comments in pinctrl bindings
* Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
dependency with,
https://patchwork.ozlabs.org/patch/1217293/

[v2]
* Splitted dt bindings and driver into different patches. Added missing bindings
and some style changes.
* Added ipq6018 schema
* Addressed review comments for gcc clock bindings.
* Removed all clk critical flags, removed 1/1 factor clocks, moved to new
way of specifying clk parents, and addressed other review comments.
* Sorted nodes based on address, name, label. Removed unused clock nodes,
Addressed other review comments.

Sricharan R (5):
dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
pinctrl: qcom: Add ipq6018 pinctrl driver
dt-bindings: qcom: Add ipq6018 bindings
arm64: dts: Add ipq6018 SoC and CP01 board support
arm64: defconfig: Enable qcom ipq6018 clock and pinctrl

Documentation/devicetree/bindings/arm/qcom.yaml | 8 +
.../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 174 +++
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 30 +
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 263 +++++
arch/arm64/configs/defconfig | 3 +
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq6018.c | 1107 ++++++++++++++++++++
9 files changed, 1597 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c

--
1.9.1

\
 
 \ /
  Last update: 2020-01-09 10:20    [W:0.072 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site