lkml.org 
[lkml]   [2020]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 25/26] docs: i2c: old-module-parameters: use monospace for filenames
Date
Use a monospace (literal) formatting for better readability of filenames.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
---
Documentation/i2c/old-module-parameters.rst | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/i2c/old-module-parameters.rst b/Documentation/i2c/old-module-parameters.rst
index 80fb117883fd..fdc470a5f999 100644
--- a/Documentation/i2c/old-module-parameters.rst
+++ b/Documentation/i2c/old-module-parameters.rst
@@ -10,9 +10,9 @@ I2C device driver binding control from user-space
Up to kernel 2.6.32, many I2C drivers used helper macros provided by
<linux/i2c.h> which created standard module parameters to let the user
control how the driver would probe I2C buses and attach to devices. These
-parameters were known as "probe" (to let the driver probe for an extra
-address), "force" (to forcibly attach the driver to a given device) and
-"ignore" (to prevent a driver from probing a given address).
+parameters were known as ``probe`` (to let the driver probe for an extra
+address), ``force`` (to forcibly attach the driver to a given device) and
+``ignore`` (to prevent a driver from probing a given address).

With the conversion of the I2C subsystem to the standard device driver
binding model, it became clear that these per-module parameters were no
@@ -46,8 +46,8 @@ New method (sysfs interface)::
# echo dummy 0x2f > /sys/bus/i2c/devices/i2c-1/new_device
# modprobe <driver>

-Of course, it is important to instantiate the "dummy" device before loading
+Of course, it is important to instantiate the ``dummy`` device before loading
the driver. The dummy device will be handled by i2c-core itself, preventing
other drivers from binding to it later on. If there is a real device at the
problematic address, and you want another driver to bind to it, then simply
-pass the name of the device in question instead of "dummy".
+pass the name of the device in question instead of ``dummy``.
--
2.24.1
\
 
 \ /
  Last update: 2020-01-06 08:47    [W:0.307 / U:2.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site