lkml.org 
[lkml]   [2020]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [V2, 3/3] arm64: dts: sc7180: Add interconnect provider DT nodes
From
Date
On 31.12.19 г. 10:58 ч., Odelu Kukatla wrote:
> Add the DT nodes for the network-on-chip interconnect buses found
> on sc7180-based platforms.
> ---
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 96 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 96 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 3676bfd..077b1e5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -8,6 +8,7 @@
> #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> #include <dt-bindings/clock/qcom,rpmh.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interconnect/qcom,sc7180.h>

This should be moved one line up if we want to keep the headers sorted.

> #include <dt-bindings/phy/phy-qcom-qusb2.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>
> @@ -1286,6 +1287,10 @@
> clock-names = "xo";
> #clock-cells = <1>;
> };
> +
> + apps_bcm_voter: bcm_voter {
> + compatible = "qcom,sc7180-bcm-voter";
> + };
> };
>
> cpufreq_hw: cpufreq@18323000 {
> @@ -1298,6 +1303,97 @@
>
> #freq-domain-cells = <1>;
> };
> + > + config_noc: interconnect@1500000 {

All DT nodes in this file are ordered by their address. Please move these up
to keep it consistent.

Thanks,
Georgi

\
 
 \ /
  Last update: 2020-01-06 18:30    [W:0.098 / U:21.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site