lkml.org 
[lkml]   [2020]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] powerpc/mpc85xx: also write addr_h to spin table for 64bit boot entry
Hi Scott,

Sorry for the late reply, I have checked the compilation error from
kbuild system, and found when CONFIG_PHYS_64BIT is not set,
phys_addr_t is 32bit, there is still "right shift count >= width of
type" error.
So I update the patches accordingly.

https://lore.kernel.org/patchwork/patch/1175560/
https://lore.kernel.org/patchwork/patch/1175559/


On Mon, Dec 30, 2019 at 3:41 PM Yingjie Bai <byj.tea@gmail.com> wrote:
>
> Hi Scott,
>
> Thanks for your time to review this patch
>
> Based on your suggestion, I have verified below new patches that pass
> compilation with and without CONFIG_RELOCATABLE
>
> https://lore.kernel.org/patchwork/patch/1173548
> https://lore.kernel.org/patchwork/patch/1173547
>
> On Wed, Dec 25, 2019 at 3:19 PM Yingjie Bai <byj.tea@gmail.com> wrote:
> >
> > Thanks Scott, I will test to see if returning phys_addr_t in __pa()
> > works for my setup.
> >
> > And another thin I will test is to compile without CONFIG_RELOCATABLE
> > before resubmitting the patch.
> >
> > On Wed, Dec 25, 2019 at 2:53 PM Scott Wood <oss@buserror.net> wrote:
> > >
> > > On Wed, 2019-12-25 at 11:24 +0800, Yingjie Bai wrote:
> > > > Hi Scott,
> > > >
> > > > __pa() returns 64bit in my setup.
> > > >
> > > > in arch/powerpc/include/asm/page.h
> > > >
> > > > #if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
> > > > #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) +
> > > > VIRT_PHYS_OFFSET))
> > > > #define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
> > > > #else
> > > > #ifdef CONFIG_PPC64
> > > > ...
> > > >
> > > >
> > > >
> > > > /* See Description below for VIRT_PHYS_OFFSET */
> > > > #if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
> > > > #ifdef CONFIG_RELOCATABLE
> > > > #define VIRT_PHYS_OFFSET virt_phys_offset
> > > > #else
> > > > #define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START)
> > > > #endif
> > > > #endif
> > >
> > > OK, so it's the lack of CONFIG_RELOCATABLE causing the build to fail. Ideally
> > > we'd make __pa() consistently return phys_addr_t, even if the upper bits are
> > > known to always be zero in a particular config.
> > >
> > > -Scott
> > >
> > >

\
 
 \ /
  Last update: 2020-01-06 06:39    [W:0.065 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site