lkml.org 
[lkml]   [2020]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 11/16] dmaengine: tegra-apb: Keep clock enabled only during of DMA transfer
From
Date
30.01.2020 17:09, Jon Hunter пишет:
>
> On 30/01/2020 04:37, Dmitry Osipenko wrote:
>> It's a bit impractical to enable hardware's clock at the time of DMA
>> channel's allocation because most of DMA client drivers allocate DMA
>> channel at the time of the driver's probing, and thus, DMA clock is kept
>> always-enabled in practice, defeating the whole purpose of runtime PM.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>> drivers/dma/tegra20-apb-dma.c | 47 ++++++++++++++++++++++++-----------
>> 1 file changed, 32 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
>> index 22b88ccff05d..0ee28d8e3c96 100644
>> --- a/drivers/dma/tegra20-apb-dma.c
>> +++ b/drivers/dma/tegra20-apb-dma.c
>> @@ -436,6 +436,8 @@ static void tegra_dma_stop(struct tegra_dma_channel *tdc)
>> tdc_write(tdc, TEGRA_APBDMA_CHAN_STATUS, status);
>> }
>> tdc->busy = false;
>> +
>> + pm_runtime_put(tdc->tdma->dev);
>> }
>>
>> static void tegra_dma_start(struct tegra_dma_channel *tdc,
>> @@ -500,18 +502,25 @@ static void tegra_dma_configure_for_next(struct tegra_dma_channel *tdc,
>> tegra_dma_resume(tdc);
>> }
>>
>> -static void tdc_start_head_req(struct tegra_dma_channel *tdc)
>> +static bool tdc_start_head_req(struct tegra_dma_channel *tdc)
>> {
>> struct tegra_dma_sg_req *sg_req;
>> + int err;
>>
>> if (list_empty(&tdc->pending_sg_req))
>> - return;
>> + return false;
>> +
>> + err = pm_runtime_get_sync(tdc->tdma->dev);
>> + if (WARN_ON_ONCE(err < 0))
>> + return false;
>>
>> sg_req = list_first_entry(&tdc->pending_sg_req, typeof(*sg_req), node);
>> tegra_dma_start(tdc, sg_req);
>> sg_req->configured = true;
>> sg_req->words_xferred = 0;
>> tdc->busy = true;
>> +
>> + return true;
>> }
>>
>> static void tdc_configure_next_head_desc(struct tegra_dma_channel *tdc)
>> @@ -615,6 +624,8 @@ static void handle_once_dma_done(struct tegra_dma_channel *tdc,
>> }
>> list_add_tail(&sgreq->node, &tdc->free_sg_req);
>>
>> + pm_runtime_put(tdc->tdma->dev);
>> +
>> /* Do not start DMA if it is going to be terminate */
>> if (to_terminate || list_empty(&tdc->pending_sg_req))
>> return;
>> @@ -730,9 +741,7 @@ static void tegra_dma_issue_pending(struct dma_chan *dc)
>> dev_err(tdc2dev(tdc), "No DMA request\n");
>> goto end;
>> }
>> - if (!tdc->busy) {
>> - tdc_start_head_req(tdc);
>> -
>> + if (!tdc->busy && tdc_start_head_req(tdc)) {
>> /* Continuous single mode: Configure next req */
>> if (tdc->cyclic) {
>> /*
>> @@ -775,6 +784,13 @@ static int tegra_dma_terminate_all(struct dma_chan *dc)
>> else
>> wcount = status;
>>
>> + /*
>> + * tegra_dma_stop() will drop the RPM's usage refcount, but
>> + * tegra_dma_resume() touches hardware and thus we should keep
>> + * the DMA clock active while it's needed.
>> + */
>> + pm_runtime_get(tdc->tdma->dev);
>> +
>
> Would it work and make it simpler to just enable in the issue_pending
> and disable in the handle_once_dma_done or terminate_all?
>
> diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
> index 3a45079d11ec..86bbb45da93d 100644
> --- a/drivers/dma/tegra20-apb-dma.c
> +++ b/drivers/dma/tegra20-apb-dma.c
> @@ -616,9 +616,14 @@ static void handle_once_dma_done(struct
> tegra_dma_channel *tdc,
> list_add_tail(&sgreq->node, &tdc->free_sg_req);
>
> /* Do not start DMA if it is going to be terminate */
> - if (to_terminate || list_empty(&tdc->pending_sg_req))
> + if (to_terminate)
> return;
>
> + if (list_empty(&tdc->pending_sg_req)) {
> + pm_runtime_put(tdc->tdma->dev);
> + return;
> + }
> +
> tdc_start_head_req(tdc);
> }
>
> @@ -729,6 +734,11 @@ static void tegra_dma_issue_pending(struct dma_chan
> *dc)
> goto end;
> }
> if (!tdc->busy) {
> + if (pm_runtime_get_sync(tdc->tdma->dev) < 0) {
> + dev_err(tdc2dev(tdc), "Failed to enable DMA!\n");
> + goto end;
> + }
> +
> tdc_start_head_req(tdc);
>
> /* Continuous single mode: Configure next req */
> @@ -788,6 +798,7 @@ static int tegra_dma_terminate_all(struct dma_chan *dc)
> get_current_xferred_count(tdc, sgreq,
> wcount);
> }
> tegra_dma_resume(tdc);
> + pm_runtime_put(tdc->tdma->dev);
>
> skip_dma_stop:
> tegra_dma_abort_all(tdc);
>

The tegra_dma_stop() should put RPM anyways, which is missed in yours
sample. Please see handle_continuous_head_request().

I'm also finding the explicit get/put a bit easier to follow in the
code, don't you think so?

\
 
 \ /
  Last update: 2020-01-30 17:12    [W:0.128 / U:1.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site