lkml.org 
[lkml]   [2020]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] panel: simple: Add Ivo M133NWF4 R0
On Thu 02 Jan 00:55 PST 2020, Sam Ravnborg wrote:

> Hi Bjorn.
>
> On Sat, Dec 28, 2019 at 10:06:58PM -0800, Bjorn Andersson wrote:
> > The InfoVision Optoelectronics M133NWF4 R0 panel is a 13.3" 1920x1080
> > eDP panel, add support for it in panel-simple.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> > drivers/gpu/drm/panel/panel-simple.c | 31 ++++++++++++++++++++++++++++
> > 1 file changed, 31 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > index ba3f85f36c2f..d7ae0ede2b6e 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -1806,6 +1806,34 @@ static const struct panel_desc innolux_zj070na_01p = {
> > },
> > };
> >
> > +static const struct drm_display_mode ivo_m133nwf4_r0_mode = {
> > + .clock = 138778,
> > + .hdisplay = 1920,
> > + .hsync_start = 1920 + 24,
> > + .hsync_end = 1920 + 24 + 48,
> > + .htotal = 1920 + 24 + 48 + 88,
> > + .vdisplay = 1080,
> > + .vsync_start = 1080 + 3,
> > + .vsync_end = 1080 + 3 + 12,
> > + .vtotal = 1080 + 3 + 12 + 17,
> > + .vrefresh = 60,
> > + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
> > +};
> > +
> > +static const struct panel_desc ivo_m133nwf4_r0 = {
> > + .modes = &ivo_m133nwf4_r0_mode,
> > + .num_modes = 1,
> > + .bpc = 8,
> > + .size = {
> > + .width = 294,
> > + .height = 165,
> > + },
> > + .delay = {
> > + .hpd_absent_delay = 200,
> > + .unprepare = 500,
> > + },
> > +};
>
> For new bindings - at least add connector_type.
> And consider bus_format and bus_flags too.
>

Sure thing, will update the two patches.

>
> > +
> > static const struct display_timing koe_tx14d24vm1bpa_timing = {
> > .pixelclock = { 5580000, 5850000, 6200000 },
> > .hactive = { 320, 320, 320 },
> > @@ -3266,6 +3294,9 @@ static const struct of_device_id platform_of_match[] = {
> > }, {
> > .compatible = "innolux,zj070na-01p",
> > .data = &innolux_zj070na_01p,
> > + }, {
> > + .compatible = "ivo,m133nwf4-r0",
> Compatible must be documented in a binding file.
> We are discussing a new binding format where it is simple to add
> a new panel. But no final conclusion yet.
>

Okay, will spin some DT bindings for these as well.

Thanks,
Bjorn

> The comments above (in panel_desc and here) also apply for the
> other patch you sent.
>
> Sam

\
 
 \ /
  Last update: 2020-01-03 06:35    [W:0.050 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site