[lkml]   [2020]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Subject[PATCH V3 0/5] Add minimal boot support for IPQ6018
    The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers,
    Gateways and Access Points.

    This series adds minimal board boot support for ipq6018-cp01 board.

    * Removed clock driver and bindings from this patch series, and added them
    as a different series.
    * Removed qpic_padN from pinctrl driver.
    * Addressed review comments in dts, and added the remaining fixed clocks their
    * Fixed review comments in pinctrl bindings
    * Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
    dependency with,

    * Splitted dt bindings and driver into different patches. Added missing bindings
    and some style changes.
    * Added ipq6018 schema
    * Addressed review comments for gcc clock bindings.
    * Removed all clk critical flags, removed 1/1 factor clocks, moved to new
    way of specifying clk parents, and addressed other review comments.
    * Sorted nodes based on address, name, label. Removed unused clock nodes,
    Addressed other review comments.

    Sricharan R (5):
    dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
    pinctrl: qcom: Add ipq6018 pinctrl driver
    dt-bindings: qcom: Add ipq6018 bindings
    arm64: dts: Add ipq6018 SoC and CP01 board support
    arm64: defconfig: Enable qcom ipq6018 clock and pinctrl

    Documentation/devicetree/bindings/arm/qcom.yaml | 8 +
    .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 174 +++
    arch/arm64/boot/dts/qcom/Makefile | 1 +
    arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 30 +
    arch/arm64/boot/dts/qcom/ipq6018.dtsi | 263 +++++
    arch/arm64/configs/defconfig | 3 +
    drivers/pinctrl/qcom/Kconfig | 10 +
    drivers/pinctrl/qcom/Makefile | 1 +
    drivers/pinctrl/qcom/pinctrl-ipq6018.c | 1107 ++++++++++++++++++++
    9 files changed, 1597 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
    create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
    create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
    create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c


     \ /
      Last update: 2020-01-03 12:51    [W:16.410 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site