lkml.org 
[lkml]   [2020]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
From
Date
Hi Simon,

On 29/1/2020 8:01 PM, Simon Goldschmidt wrote:
> + some people possibly interested in this for the Altera platforms (see below)
>
> Hi all,
>
> This is about moving the cadence qspi driver (which is used on TI, Altera FPGAs
> and a new Intel SoC) to spi-mem.Vadivel asked me to include some Altera people
> in the loop (see below), as this is the only platform currently untested,
> I think.
>
> Right now, I'm not in the position to test this myself as we're currently stuck
> on an older RT kernel, so I cannot test with HEAD.
>
> Feel free to involve other Intel/Altera if you're interested in that peripheral
> not being broke for socfpga in one of the next releases :-)
>
> On Wed, Jan 29, 2020 at 10:18 AM Ramuthevar, Vadivel MuruganX
> <vadivel.muruganx.ramuthevar@linux.intel.com> wrote:
>> Hi,
>>
>> Thank you for the query and confirmation.
>>
>> On 29/1/2020 4:31 PM, Simon Goldschmidt wrote:
>>
>> On Wed, Jan 29, 2020 at 8:25 AM Ramuthevar,Vadivel MuruganX
>> <vadivel.muruganx.ramuthevar@linux.intel.com> wrote:
>>
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>>
>> Add support for the Cadence QSPI controller. This controller is
>> present in the Intel Lightning Mountain(LGM) SoCs, Altera and TI SoCs.
>> This driver has been tested on the Intel LGM SoCs.
>>
>> So it has been tested on LGM and Vignesh gave his ok for TI. Is there anyone
>> in the loop by now checking that this is valid for the 3rd platform using this
>> (Altera)?
>>
>> Or am I wrong in thinking that this driver is meant to replace
>> drivers/mtd/spi-nor/cadence-quadspi.c used on that platform?
>>
>> Absolutely , You are right, this driver is meant to replace to drivers/mtd/spi-nor/cadence-quadspi.c
>> for Intel, TI and Altera SoC's using Cadence-QSPI IP.
>>
>> Meanwhile we have adapted to spi-mem framework (to support spi-nor/nand)and also didn't change the existing
>> functionalities of spi-nor flash operations like hw_init/read/write/erase in drivers/mtd/spi-nor/cadence-quadspi.c,
>> so it works fine (might be in Altera as well).
>>
>> Already I checked that Graham Moore <grmoore@opensource.altera.com> who has submitted the existing driver patches to upstream,
>> His mail-id is bouncing back, then I decided that you are the right person to ask, could you please add them in loop if you know the team
>> (socfpga platform engineers).
> OK, done that. I mainly know them from U-Boot development, so I'm not sure
> who's responsible for the Linux drivers...
Thank you for adding the team and respective members, let's see.

Regards
vadivel
>
> Regards,
> Simon
>
>> Regards
>> Vadivel
>>
>> Regards,
>> Simon
>>

\
 
 \ /
  Last update: 2020-01-30 04:43    [W:0.144 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site