lkml.org 
[lkml]   [2020]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v6 2/2] dt-bindings: hwmon: (adt7475) Added missing adt7475 documentation
Date
On Mon, 2020-01-27 at 09:48 -0600, Rob Herring wrote:
> On Mon, Jan 27, 2020 at 11:10:14AM +1300, Logan Shaw wrote:
> > Added a new file documenting the adt7475 devicetree and added the
> > four
> > new properties to it.
> >
> > Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
> > ---
> > ---
> > .../devicetree/bindings/hwmon/adt7475.yaml | 95
> > +++++++++++++++++++
> > 1 file changed, 95 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/hwmon/adt7475.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> > b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> > new file mode 100644
> > index 000000000000..450da5e66e07
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
> > @@ -0,0 +1,95 @@
> > +# SPDX-License-Identifier: GPL-2.0
>
> Dual license new bindings please:
>
> (GPL-2.0-only OR BSD-2-Clause)
>
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/adt7475.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ADT7475 hwmon sensor
> > +
> > +maintainers:
> > + - Jean Delvare <jdelvare@suse.com>
> > +
> > +description: |
> > + The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors
> > and multiple
> > + PWN fan controllers.
> > +
> > + They support monitoring and controlling up to four fans (the
> > ADT7490 can only
> > + control up to three). They support reading a single on chip
> > temperature
> > + sensor and two off chip temperature sensors (the ADT7490
> > additionally
> > + supports measuring up to three current external temperature
> > sensors with
> > + series resistance cancellation (SRC)).
> > +
> > + Datasheets:
> > + https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
> > + https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
> > + https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
> > + https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
> > +
> > + Description taken from omsemiconductors specification sheets,
> > with minor
>
> omsemi?
> ^
>
> > + rephrasing.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - adi,adt7473
> > + - adi,adt7475
> > + - adi,adt7476
> > + - adi,adt7490
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + bypass-attenuator-in0:
>
> Needs a vendor prefix and a type ref.
>
> > + description: |
> > + Configures bypassing the individual voltage input
> > + attenuator, on in0. This is supported on the ADT7476 and
> > ADT7490.
> > + If set to a non-zero integer the attenuator is bypassed, if
> > set to
> > + zero the attenuator is not bypassed. If the property is
> > absent then
> > + the config register is not modified.
>
> Sounds like this could be boolean? If not, define a schema for what
> are
> valid values.

By boolean are you referring to a dts property that is evaluated (using
function of_property_read_bool) as true/false, depending on its
presence? For example "regulator-always-on" in:
/Documentation/devicetree/bindings/regulator/regulator.yaml .

>
> > + maxItems: 1
> > +
> > + bypass-attenuator-in1:
> > + description: |
> > + Configures bypassing the individual voltage input
> > + attenuator, on in1. This is supported on the ADT7473,
> > ADT7475,
> > + ADT7476 and ADT7490. If set to a non-zero integer the
> > attenuator
> > + is bypassed, if set to zero the attenuator is not bypassed.
> > If the
> > + property is absent then the config register is not modified.
> > + maxItems: 1
> > +
> > + bypass-attenuator-in3:
> > + description: |
> > + Configures bypassing the individual voltage input
> > + attenuator, on in3. This is supported on the ADT7476 and
> > ADT7490.
> > + If set to a non-zero integer the attenuator is bypassed, if
> > set to
> > + zero the attenuator is not bypassed. If the property is
> > absent then
> > + the config register is not modified.
> > + maxItems: 1
> > +
> > + bypass-attenuator-in4:
>
> These 4 could be a single entry under patternProperties.
>
>
> > + description: |
> > + Configures bypassing the individual voltage input
> > + attenuator, on in4. This is supported on the ADT7476 and
> > ADT7490.
> > + If set to a non-zero integer the attenuator is bypassed, if
> > set to
> > + zero the attenuator is not bypassed. If the property is
> > absent then
> > + the config register is not modified.
> > + maxItems: 1
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +examples:
> > + - |
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + hwmon@2e {
> > + compatible = "adi,adt7476";
> > + reg = <0x2e>;
> > + bypass-attenuator-in0 = <1>;
> > + bypass-attenuator-in1 = <0>;
> > + };
> > + };
> > +...
> > --
> > 2.25.0
> >
\
 
 \ /
  Last update: 2020-01-30 04:08    [W:0.132 / U:1.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site