lkml.org 
[lkml]   [2020]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft
Date
The 'qcom,gcc.yaml' file failed self-validation (dt_binding_check)
because it required a property to be either (3 entries big),
(3 entries big), or (7 entries big), but not more than one of those
things. That didn't make a ton of sense.

This patch splits all of the exceptional device trees (AKA those that
would have needed if/then/else rules) from qcom,gcc.yaml. It also
cleans up some cruft found while doing that.

After this lands, this worked for me atop clk-next with just the known
error about msm8998:
for f in \
Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml \
Documentation/devicetree/bindings/clock/qcom,gcc.yaml; do \
ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=$f; \
done

I then picked this patch atop linux-next (next-20200129) and ran:
# Delete broken yaml:
rm Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
ARCH=arm64 make dt_binding_check | grep 'clock/qcom'
...and that didn't seem to indicate problems.

Arbitrary decisions made (yell if you want changed):
- Left all the older devices (where clocks / clock-names weren't
specified) in a single file.
- Didn't make clocks "required" for msm8996 but left them as listed.
This seems a little weird but it matches the old binding.

Misc cleanups as part of this patch:
- sm8150 was claimed to be same set of clocks as sc7180, but driver
and dts appear to say that "bi_tcxo_ao" doesn't exist. Fixed.
- In "apq8064", "#thermal-sensor-cells" was missing the "#".
- Got rid of "|" at the end of top description since spacing doesn't
matter.
- Changed indentation to consistently 2 spaces (it was 3 in some
places).
- Added period at the end of protected-clocks description.
- No space before ":".
- Updated sc7180/sm8150 example to use the 'qcom,rpmh.h' include.
- Updated sc7180/sm8150 example to use larger address/size cells as
per reality.
- Updated sc7180/sm8150 example to point to the sleep_clk rather than
<0>.
- Made it so that gcc-ipq8074 didn't require #power-domain-cells since
actual dts didn't have it and I got no hits from:
git grep _GDSC include/dt-bindings/clock/qcom,gcc-ipq8074.h
- Made it so that gcc-qcs404 didn't require #power-domain-cells since
actual dts didn't have it and I got no hits from:
git grep _GDSC include/dt-bindings/clock/qcom,gcc-qcs404.h

Noticed, but not done in this patch (volunteers needed):
- Add "aud_ref_clk" to sm8150 bindings / dts even though I found a
reference to it in "gcc-sm8150.c".
- Fix node name in actual ipq8074 to be "clock-controller" (it's gcc).
- Since the example doesn't need phandes to exist, in msm8998 could
just make up places providing some of the clocks currently bogused
out with <0>.
- On msm8998 clocks are listed as required but current dts doesn't
have them.

Fixes: ab91f72e018a ("clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Changes in v2:
- Clocks are required for msm8998; note that current dts is broken.
- Drop description for 'gcc-apq8064' nvmem-cell-names.
- Commit message now describes running dt_binding_check differently.
- Added Rob's review tag.

.../bindings/clock/qcom,gcc-apq8064.yaml | 79 +++++++
.../bindings/clock/qcom,gcc-ipq8074.yaml | 48 ++++
.../bindings/clock/qcom,gcc-msm8996.yaml | 65 ++++++
.../bindings/clock/qcom,gcc-msm8998.yaml | 90 ++++++++
.../bindings/clock/qcom,gcc-qcs404.yaml | 48 ++++
.../bindings/clock/qcom,gcc-sc7180.yaml | 72 ++++++
.../bindings/clock/qcom,gcc-sm8150.yaml | 69 ++++++
.../devicetree/bindings/clock/qcom,gcc.yaml | 212 ++----------------
8 files changed, 489 insertions(+), 194 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
new file mode 100644
index 000000000000..a386cfd27793
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-apq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description:
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on APQ8064.
+
+properties:
+ compatible:
+ const: qcom,gcc-apq8064
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ nvmem-cells:
+ minItems: 1
+ maxItems: 2
+ description:
+ Qualcomm TSENS (thermal sensor device) on some devices can
+ be part of GCC and hence the TSENS properties can also be part
+ of the GCC/clock-controller node.
+ For more details on the TSENS properties please refer
+ Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+
+ nvmem-cell-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: calib
+ - const: calib_backup
+
+ '#thermal-sensor-cells':
+ const: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+ - nvmem-cells
+ - nvmem-cell-names
+ - '#thermal-sensor-cells'
+
+examples:
+ - |
+ clock-controller@900000 {
+ compatible = "qcom,gcc-apq8064";
+ reg = <0x00900000 0x4000>;
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ #thermal-sensor-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
new file mode 100644
index 000000000000..1c6461c52a47
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-ipq8074.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Bindingfor IPQ8074
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description:
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on IPQ8074.
+
+properties:
+ compatible:
+ const: qcom,gcc-ipq8074
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+
+examples:
+ - |
+ clock-controller@1800000 {
+ compatible = "qcom,gcc-ipq8074";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
new file mode 100644
index 000000000000..32782e648c7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-msm8996.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8996
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description:
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on MSM8996.
+
+properties:
+ compatible:
+ const: qcom,gcc-msm8996
+
+ clocks:
+ items:
+ - description: XO source
+ - description: Second XO source
+ - description: Sleep clock source
+
+ clock-names:
+ items:
+ - const: cxo
+ - const: cxo2
+ - const: sleep_clk
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+examples:
+ - |
+ clock-controller@300000 {
+ compatible = "qcom,gcc-msm8996";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x300000 0x90000>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
new file mode 100644
index 000000000000..b54cc6b0b1d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-msm8998.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8998
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description:
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on MSM8998.
+
+properties:
+ compatible:
+ const: qcom,gcc-msm8998
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+ - description: USB 3.0 phy pipe clock
+ - description: UFS phy rx symbol clock for pipe 0
+ - description: UFS phy rx symbol clock for pipe 1
+ - description: UFS phy tx symbol clock
+ - description: PCIE phy pipe clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sleep_clk
+ - const: usb3_pipe
+ - const: ufs_rx_symbol0
+ - const: ufs_rx_symbol1
+ - const: ufs_tx_symbol0
+ - const: pcie0_pipe
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ clock-controller@100000 {
+ compatible = "qcom,gcc-msm8998";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x00100000 0xb0000>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&sleep>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "xo",
+ "sleep_clk",
+ "usb3_pipe",
+ "ufs_rx_symbol0",
+ "ufs_rx_symbol1",
+ "ufs_tx_symbol0",
+ "pcie0_pipe";
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
new file mode 100644
index 000000000000..f881cbeab594
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-qcs404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Bindingfor QCS404
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description:
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on QCS404.
+
+properties:
+ compatible:
+ const: qcom,gcc-qcs404
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+
+examples:
+ - |
+ clock-controller@1800000 {
+ compatible = "qcom,gcc-qcs404";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
new file mode 100644
index 000000000000..b6a27da0c9b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SC7180
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description:
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on SC7180.
+
+properties:
+ compatible:
+ const: qcom,gcc-sc7180
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board active XO source
+ - description: Sleep clock source
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: bi_tcxo_ao
+ - const: sleep_clk
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@100000 {
+ compatible = "qcom,gcc-sc7180";
+ reg = <0 0x00100000 0 0x1f0000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
new file mode 100644
index 000000000000..ca581b2e3286
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc-sm8150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM8150
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <tdas@codeaurora.org>
+
+description:
+ Qualcomm global clock control module which supports the clocks, resets and
+ power domains on SM8150.
+
+properties:
+ compatible:
+ const: qcom,gcc-sm8150
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: sleep_clk
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ protected-clocks:
+ description:
+ Protected clock specifier list as per common clock binding.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@100000 {
+ compatible = "qcom,gcc-sm8150";
+ reg = <0 0x00100000 0 0x1f0000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index cac1150c9292..a891e5a37369 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -10,81 +10,28 @@ maintainers:
- Stephen Boyd <sboyd@kernel.org>
- Taniya Das <tdas@codeaurora.org>

-description: |
+description:
Qualcomm global clock control module which supports the clocks, resets and
power domains.

properties:
- compatible :
+ compatible:
enum:
- - qcom,gcc-apq8064
- - qcom,gcc-apq8084
- - qcom,gcc-ipq4019
- - qcom,gcc-ipq6018
- - qcom,gcc-ipq8064
- - qcom,gcc-ipq8074
- - qcom,gcc-msm8660
- - qcom,gcc-msm8916
- - qcom,gcc-msm8960
- - qcom,gcc-msm8974
- - qcom,gcc-msm8974pro
- - qcom,gcc-msm8974pro-ac
- - qcom,gcc-msm8994
- - qcom,gcc-msm8996
- - qcom,gcc-msm8998
- - qcom,gcc-mdm9615
- - qcom,gcc-qcs404
- - qcom,gcc-sc7180
- - qcom,gcc-sdm630
- - qcom,gcc-sdm660
- - qcom,gcc-sdm845
- - qcom,gcc-sm8150
-
- clocks:
- oneOf:
- #qcom,gcc-sm8150
- #qcom,gcc-sc7180
- - items:
- - description: Board XO source
- - description: Board active XO source
- - description: Sleep clock source
- #qcom,gcc-msm8996
- - items:
- - description: XO source
- - description: Second XO source
- - description: Sleep clock source
- #qcom,gcc-msm8998
- - items:
- - description: Board XO source
- - description: Sleep clock source
- - description: USB 3.0 phy pipe clock
- - description: UFS phy rx symbol clock for pipe 0
- - description: UFS phy rx symbol clock for pipe 1
- - description: UFS phy tx symbol clock
- - description: PCIE phy pipe clock
-
- clock-names:
- oneOf:
- #qcom,gcc-sm8150
- #qcom,gcc-sc7180
- - items:
- - const: bi_tcxo
- - const: bi_tcxo_ao
- - const: sleep_clk
- #qcom,gcc-msm8996
- - items:
- - const: cxo
- - const: cxo2
- - const: sleep_clk
- #qcom,gcc-msm8998
- - items:
- - const: xo
- - const: sleep_clk
- - const: usb3_pipe
- - const: ufs_rx_symbol0
- - const: ufs_rx_symbol1
- - const: ufs_tx_symbol0
- - const: pcie0_pipe
+ - qcom,gcc-apq8084
+ - qcom,gcc-ipq4019
+ - qcom,gcc-ipq6018
+ - qcom,gcc-ipq8064
+ - qcom,gcc-msm8660
+ - qcom,gcc-msm8916
+ - qcom,gcc-msm8960
+ - qcom,gcc-msm8974
+ - qcom,gcc-msm8974pro
+ - qcom,gcc-msm8974pro-ac
+ - qcom,gcc-msm8994
+ - qcom,gcc-mdm9615
+ - qcom,gcc-sdm630
+ - qcom,gcc-sdm660
+ - qcom,gcc-sdm845

'#clock-cells':
const: 1
@@ -98,31 +45,9 @@ properties:
reg:
maxItems: 1

- nvmem-cells:
- minItems: 1
- maxItems: 2
- description:
- Qualcomm TSENS (thermal sensor device) on some devices can
- be part of GCC and hence the TSENS properties can also be part
- of the GCC/clock-controller node.
- For more details on the TSENS properties please refer
- Documentation/devicetree/bindings/thermal/qcom-tsens.txt
-
- nvmem-cell-names:
- minItems: 1
- maxItems: 2
- description:
- Names for each nvmem-cells specified.
- items:
- - const: calib
- - const: calib_backup
-
- 'thermal-sensor-cells':
- const: 1
-
protected-clocks:
description:
- Protected clock specifier list as per common clock binding
+ Protected clock specifier list as per common clock binding.

required:
- compatible
@@ -131,33 +56,6 @@ required:
- '#reset-cells'
- '#power-domain-cells'

-if:
- properties:
- compatible:
- contains:
- const: qcom,gcc-apq8064
-
-then:
- required:
- - nvmem-cells
- - nvmem-cell-names
- - '#thermal-sensor-cells'
-
-else:
- if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,gcc-msm8998
- - qcom,gcc-sm8150
- - qcom,gcc-sc7180
- then:
- required:
- - clocks
- - clock-names
-
-
examples:
# Example for GCC for MSM8960:
- |
@@ -168,78 +66,4 @@ examples:
#reset-cells = <1>;
#power-domain-cells = <1>;
};
-
-
- # Example of GCC with TSENS properties:
- - |
- clock-controller@900000 {
- compatible = "qcom,gcc-apq8064";
- reg = <0x00900000 0x4000>;
- nvmem-cells = <&tsens_calib>, <&tsens_backup>;
- nvmem-cell-names = "calib", "calib_backup";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- #thermal-sensor-cells = <1>;
- };
-
- # Example of GCC with protected-clocks properties:
- - |
- clock-controller@100000 {
- compatible = "qcom,gcc-sdm845";
- reg = <0x100000 0x1f0000>;
- protected-clocks = <187>, <188>, <189>, <190>, <191>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
-
- # Example of GCC with clock node properties for SM8150:
- - |
- clock-controller@100000 {
- compatible = "qcom,gcc-sm8150";
- reg = <0x00100000 0x1f0000>;
- clocks = <&rpmhcc 0>, <&rpmhcc 1>, <&sleep_clk>;
- clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
-
- # Example of GCC with clock nodes properties for SC7180:
- - |
- clock-controller@100000 {
- compatible = "qcom,gcc-sc7180";
- reg = <0x100000 0x1f0000>;
- clocks = <&rpmhcc 0>, <&rpmhcc 1>, <0>;
- clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
-
- # Example of MSM8998 GCC:
- - |
- #include <dt-bindings/clock/qcom,rpmcc.h>
- clock-controller@100000 {
- compatible = "qcom,gcc-msm8998";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x00100000 0xb0000>;
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
- <&sleep>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>;
- clock-names = "xo",
- "sleep_clk",
- "usb3_pipe",
- "ufs_rx_symbol0",
- "ufs_rx_symbol1",
- "ufs_tx_symbol0",
- "pcie0_pipe";
- };
...
--
2.25.0.341.g760bfbb309-goog
\
 
 \ /
  Last update: 2020-01-30 00:26    [W:0.126 / U:3.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site