lkml.org 
[lkml]   [2020]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] remoteproc: Add elf64 support in elf loader
On Wed, Jan 29, 2020 at 09:55:17AM +0100, Clément Leger wrote:
> Ok, here is the example to be more clear:
>
> Content of elfxx_loader.h:
>
> int elf##ELF_TYPE##_load(...) {
> struct elf##ELF_TYPE##_shdr *shdr = data;
> ...
> }
>
> Then in elf_loader.c file:
>
> #define ELF_TYPE 32
> #include "elfxx_loader.h"
> #undef ELF_TYPE
> #define ELF_TYPE 64
> #include "elfxx_loader.h"
>
> int elf_load(...) {
> if (class == elf64)
> elf64_load(...);
> else
> elf32_load(...);
> }
>
> This is used for syscall_table.c in arch for instance.
> A macro must be defined and then the ehader is included and
> "generates" code.
>
> #undef __SYSCALL
> #define __SYSCALL(nr, call) [nr] = (call),
>
> void *sys_call_table[__NR_syscalls] = {
> [0 ... __NR_syscalls - 1] = sys_ni_syscall,
> #include <asm/unistd.h>
> };
>
> Hope this shed some light on my suggestion.

Thank you for taking the time to do this.

I fear elfxx_loader.h would become very cryptic and hard to debug. I think your
original approach strikes the right balance between readabiliy and code
duplication.

>
> Clément
>
> ----- On 28 Jan, 2020, at 18:14, Mathieu Poirier mathieu.poirier@linaro.org wrote:
>
> > On Mon, 27 Jan 2020 at 01:33, Clément Leger <cleger@kalray.eu> wrote:
> >>
> >> Hi Mathieu,
> >>
> >> Thanks for your thorough review. While thinking about it,there is at least
> >> another option which would consist in splitting all elf specific functions into
> >> a separate .h file and then include it in a .c to "instantiate" the functions
> >> with correct types. For instance, it would look like this:
> >>
> >> #define ELF_TYPE 32
> >> #include "elf_functions.h"
> >> #undef ELF_TYPE
> >> #define ELF_TYPE 64
> >> #include "elf_functions.h"
> >>
> >> pros: More readable and type-checking ok
> >> cons: A bit hackish
> >>
> >> I would say this might be a better optino than my current patch.
> >> However, I'm not sure this kind of thing of well accepted in the kernel.
> >
> > I won't claim to fully understand your suggestion above, but if it is
> > suspicious enough to look hackish to you than it will probably look
> > hackish to other people. Nonetheless there might be a case for
> > exception if the approach yields clear advantages. Can you point me
> > to an example somewhere in the kernel code where something similar
> > would have been done?
> >
> >>
> >> Clément
> >>
> >> ----- On 24 Jan, 2020, at 22:58, Mathieu Poirier mathieu.poirier@linaro.org
> >> wrote:
> >>
> >> > On Fri, Jan 24, 2020 at 09:24:16AM +0100, Clément Leger wrote:
> >> >> Hi Mathieu,
> >> >>
> >> >> ----- On 24 Jan, 2020, at 01:53, Mathieu Poirier mathieu.poirier@linaro.org
> >> >> wrote:
> >> >>
> >> >> > Hi Clement,
> >> >> >
> >> >> > On Fri, Oct 04, 2019 at 08:42:20PM +0200, Clement Leger wrote:
> >> >> >> elf32 and elf64 mainly differ by their types. In order to avoid
> >> >> >> copy/pasting the whole loader code, generate static inline functions
> >> >> >> which will access values according to the elf class. It allows to keep a
> >> >> >> common loader basis.
> >> >> >> In order to accomodate both elf types sizes, the maximum size for a
> >> >> >> elf header member is chosen using the maximum value of both elf class.
> >> >> >>
> >> >> >> Signed-off-by: Clement Leger <cleger@kalray.eu>
> >> >> >> Tested-by: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
> >> >> >> ---
> >> >> >> Changes in v2:
> >> >> >> - Add ELF64 support in documentation
> >> >> >>
> >> >> >
> >> >> > First and foremost please address the complaints from checkpatch.
> >> >>
> >> >> I fixed one typo in accommodate. The other checkpatch complaint is
> >> >> about missing parenthesis for macros with complex values which is
> >> >> unfortunately not possible since I'm generating inline functions.
> >> >>
> >> >> Did you have any other one ?
> >> >>
> >> >> >
> >> >> >> ---
> >> >> >> Documentation/remoteproc.txt | 2 +-
> >> >> >> drivers/remoteproc/remoteproc_elf_loader.c | 135 ++++++++++++++++++-----------
> >> >> >> drivers/remoteproc/remoteproc_elf_loader.h | 69 +++++++++++++++
> >> >> >> drivers/remoteproc/remoteproc_internal.h | 2 +-
> >> >> >> drivers/remoteproc/st_remoteproc.c | 2 +-
> >> >> >> include/linux/remoteproc.h | 4 +-
> >> >> >> 6 files changed, 157 insertions(+), 57 deletions(-)
> >> >> >> create mode 100644 drivers/remoteproc/remoteproc_elf_loader.h
> >> >> >>
> >> >> >> diff --git a/Documentation/remoteproc.txt b/Documentation/remoteproc.txt
> >> >> >> index 77fb03acdbb4..bf4f0c41ec4e 100644
> >> >> >> --- a/Documentation/remoteproc.txt
> >> >> >> +++ b/Documentation/remoteproc.txt
> >> >> >> @@ -230,7 +230,7 @@ in the used rings.
> >> >> >> Binary Firmware Structure
> >> >> >> =========================
> >> >> >>
> >> >> >> -At this point remoteproc only supports ELF32 firmware binaries. However,
> >> >> >> +At this point remoteproc supports ELF32 and ELF64 firmware binaries. However,
> >> >> >> it is quite expected that other platforms/devices which we'd want to
> >> >> >> support with this framework will be based on different binary formats.
> >> >> >>
> >> >> >> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c
> >> >> >> b/drivers/remoteproc/remoteproc_elf_loader.c
> >> >> >> index b17d72ec8603..6a2d31d6092c 100644
> >> >> >> --- a/drivers/remoteproc/remoteproc_elf_loader.c
> >> >> >> +++ b/drivers/remoteproc/remoteproc_elf_loader.c
> >> >> >> @@ -31,6 +31,7 @@
> >> >> >> #include <linux/elf.h>
> >> >> >>
> >> >> >> #include "remoteproc_internal.h"
> >> >> >> +#include "remoteproc_elf_loader.h"
> >> >> >>
> >> >> >> /**
> >> >> >> * rproc_elf_sanity_check() - Sanity Check ELF firmware image
> >> >> >> @@ -43,8 +44,16 @@ int rproc_elf_sanity_check(struct rproc *rproc, const struct
> >> >> >> firmware *fw)
> >> >> >> {
> >> >> >> const char *name = rproc->firmware;
> >> >> >> struct device *dev = &rproc->dev;
> >> >> >> + /*
> >> >> >> + * Elf files are beginning with the same structure. Thus, to simplify
> >> >> >> + * header parsing, we can use the elf32_hdr one for both elf64 and
> >> >> >> + * elf32.
> >> >> >> + */
> >> >> >> struct elf32_hdr *ehdr;
> >> >> >> + u32 elf_shdr_size;
> >> >> >> + u64 phoff, shoff;
> >> >> >> char class;
> >> >> >> + u16 phnum;
> >> >> >>
> >> >> >> if (!fw) {
> >> >> >> dev_err(dev, "failed to load %s\n", name);
> >> >> >> @@ -58,9 +67,13 @@ int rproc_elf_sanity_check(struct rproc *rproc, const struct
> >> >> >> firmware *fw)
> >> >> >
> >> >> > In the current code [1] fw->size is compared against the size of an elf32_hdr.
> >> >> > If support for elf64 is added that code needs to be modified to check for the
> >> >> > right header size using fw_elf_get_class().
> >> >>
> >> >> Actually, the elf32 header is smaller than the elf64 one so this check is
> >> >> there to ensure that we have at least a minimal elf header (elf32).
> >> >> And since the class is derived from the header, you better have to check the
> >> >> header size before accessing it.
> >> >>
> >> >> To be more clear, I could compare it to min(sizeof(struct elf32_hdr),
> >> >> sizeof(struct elf64_hdr)) or add a comment at least stating that since
> >> >> elf header contains the same fields for identification, we can use the
> >> >> elf32 one.
> >> >>
> >> >> >
> >> >> > [1]
> >> >> > https://elixir.bootlin.com/linux/v5.5-rc6/source/drivers/remoteproc/remoteproc_elf_loader.c#L46
> >> >> >
> >> >> >>
> >> >> >> ehdr = (struct elf32_hdr *)fw->data;
> >> >> >>
> >> >> >> - /* We only support ELF32 at this point */
> >> >> >> + if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) {
> >> >> >> + dev_err(dev, "Image is corrupted (bad magic)\n");
> >> >> >> + return -EINVAL;
> >> >> >> + }
> >> >> >> +
> >> >> >
> >> >> > Is there a reason to move this check up where? If not please bring it back to
> >> >> > its original location, that is below:
> >> >> >
> >> >> > "if (fw->size < ehdr->e_shoff + sizeof(structelf32_shdr))"
> >> >> >
> >> >>
> >> >> This is because the new check for size uses elf_shdr_size which is derived from
> >> >> the class. And since the class is extracted from the elf header, we need to
> >> >> check
> >> >> the header to be correct first.
> >> >>
> >> >> >> class = ehdr->e_ident[EI_CLASS];
> >> >> >> - if (class != ELFCLASS32) {
> >> >> >> + if (class != ELFCLASS32 && class != ELFCLASS64) {
> >> >> >> dev_err(dev, "Unsupported class: %d\n", class);
> >> >> >> return -EINVAL;
> >> >> >> }
> >> >> >> @@ -75,26 +88,29 @@ int rproc_elf_sanity_check(struct rproc *rproc, const struct
> >> >> >> firmware *fw)
> >> >> >> return -EINVAL;
> >> >> >> }
> >> >> >>
> >> >> >> - if (fw->size < ehdr->e_shoff + sizeof(struct elf32_shdr)) {
> >> >> >> - dev_err(dev, "Image is too small\n");
> >> >> >> - return -EINVAL;
> >> >> >> - }
> >> >> >> + phoff = elf_hdr_e_phoff(class, fw->data);
> >> >> >> + shoff = elf_hdr_e_shoff(class, fw->data);
> >> >> >> + phnum = elf_hdr_e_phnum(class, fw->data);
> >> >> >> + elf_shdr_size = elf_size_of_shdr(class);
> >> >> >>
> >> >> >> - if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) {
> >> >> >> - dev_err(dev, "Image is corrupted (bad magic)\n");
> >> >> >> + if (fw->size < shoff + elf_shdr_size) {
> >> >> >> + dev_err(dev, "Image is too small\n");
> >> >> >> return -EINVAL;
> >> >> >> }
> >> >> >>
> >> >> >> - if (ehdr->e_phnum == 0) {
> >> >> >> + if (phnum == 0) {
> >> >> >> dev_err(dev, "No loadable segments\n");
> >> >> >> return -EINVAL;
> >> >> >> }
> >> >> >>
> >> >> >> - if (ehdr->e_phoff > fw->size) {
> >> >> >> + if (phoff > fw->size) {
> >> >> >> dev_err(dev, "Firmware size is too small\n");
> >> >> >> return -EINVAL;
> >> >> >> }
> >> >> >>
> >> >> >> + dev_dbg(dev, "Firmware is an elf%d file\n",
> >> >> >> + class == ELFCLASS32 ? 32 : 64);
> >> >> >> +
> >> >> >
> >> >> > Yes, this is useful.
> >> >> >
> >> >> >> return 0;
> >> >> >> }
> >> >> >> EXPORT_SYMBOL(rproc_elf_sanity_check);
> >> >> >> @@ -110,11 +126,9 @@ EXPORT_SYMBOL(rproc_elf_sanity_check);
> >> >> >> * Note that the boot address is not a configurable property of all remote
> >> >> >> * processors. Some will always boot at a specific hard-coded address.
> >> >> >> */
> >> >> >> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
> >> >> >> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
> >> >> >> {
> >> >> >> - struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data;
> >> >> >> -
> >> >> >> - return ehdr->e_entry;
> >> >> >> + return elf_hdr_e_entry(fw_elf_get_class(fw), fw->data);
> >> >> >> }
> >> >> >> EXPORT_SYMBOL(rproc_elf_get_boot_addr);
> >> >> >>
> >> >> >> @@ -145,37 +159,41 @@ EXPORT_SYMBOL(rproc_elf_get_boot_addr);
> >> >> >> int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
> >> >> >> {
> >> >> >> struct device *dev = &rproc->dev;
> >> >> >> - struct elf32_hdr *ehdr;
> >> >> >> - struct elf32_phdr *phdr;
> >> >> >> + const void *ehdr, *phdr;
> >> >> >> int i, ret = 0;
> >> >> >> + u16 phnum;
> >> >> >> const u8 *elf_data = fw->data;
> >> >> >> + u8 class = fw_elf_get_class(fw);
> >> >> >> + u32 elf_phdr_size = elf_size_of_phdr(class);
> >> >> >>
> >> >> >> - ehdr = (struct elf32_hdr *)elf_data;
> >> >> >> - phdr = (struct elf32_phdr *)(elf_data + ehdr->e_phoff);
> >> >> >> + ehdr = elf_data;
> >> >> >> + phnum = elf_hdr_e_phnum(class, ehdr);
> >> >> >> + phdr = elf_data + elf_hdr_e_phoff(class, ehdr);
> >> >> >>
> >> >> >> /* go through the available ELF segments */
> >> >> >> - for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
> >> >> >> - u32 da = phdr->p_paddr;
> >> >> >> - u32 memsz = phdr->p_memsz;
> >> >> >> - u32 filesz = phdr->p_filesz;
> >> >> >> - u32 offset = phdr->p_offset;
> >> >> >> + for (i = 0; i < phnum; i++, phdr += elf_phdr_size) {
> >> >> >> + u64 da = elf_phdr_p_paddr(class, phdr);
> >> >> >> + u64 memsz = elf_phdr_p_memsz(class, phdr);
> >> >> >> + u64 filesz = elf_phdr_p_filesz(class, phdr);
> >> >> >> + u64 offset = elf_phdr_p_offset(class, phdr);
> >> >> >> + u32 type = elf_phdr_p_type(class, phdr);
> >> >> >> void *ptr;
> >> >> >>
> >> >> >> - if (phdr->p_type != PT_LOAD)
> >> >> >> + if (type != PT_LOAD)
> >> >> >> continue;
> >> >> >>
> >> >> >> - dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n",
> >> >> >> - phdr->p_type, da, memsz, filesz);
> >> >> >> + dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
> >> >> >> + type, da, memsz, filesz);
> >> >> >>
> >> >> >> if (filesz > memsz) {
> >> >> >> - dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n",
> >> >> >> + dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
> >> >> >> filesz, memsz);
> >> >> >> ret = -EINVAL;
> >> >> >> break;
> >> >> >> }
> >> >> >>
> >> >> >> if (offset + filesz > fw->size) {
> >> >> >> - dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
> >> >> >> + dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
> >> >> >> offset + filesz, fw->size);
> >> >> >> ret = -EINVAL;
> >> >> >> break;
> >> >> >> @@ -184,14 +202,15 @@ int rproc_elf_load_segments(struct rproc *rproc, const
> >> >> >> struct firmware *fw)
> >> >> >> /* grab the kernel address for this device address */
> >> >> >> ptr = rproc_da_to_va(rproc, da, memsz);
> >> >> >> if (!ptr) {
> >> >> >> - dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz);
> >> >> >> + dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
> >> >> >> + memsz);
> >> >> >> ret = -EINVAL;
> >> >> >> break;
> >> >> >> }
> >> >> >>
> >> >> >> /* put the segment where the remote processor expects it */
> >> >> >> - if (phdr->p_filesz)
> >> >> >> - memcpy(ptr, elf_data + phdr->p_offset, filesz);
> >> >> >> + if (filesz)
> >> >> >> + memcpy(ptr, elf_data + offset, filesz);
> >> >> >>
> >> >> >> /*
> >> >> >> * Zero out remaining memory for this segment.
> >> >> >> @@ -208,24 +227,32 @@ int rproc_elf_load_segments(struct rproc *rproc, const
> >> >> >> struct firmware *fw)
> >> >> >> }
> >> >> >> EXPORT_SYMBOL(rproc_elf_load_segments);
> >> >> >>
> >> >> >> -static struct elf32_shdr *
> >> >> >> -find_table(struct device *dev, struct elf32_hdr *ehdr, size_t fw_size)
> >> >> >> +static const void *
> >> >> >
> >> >> > Not sure I understand the "const" - was the compiler complaining?
> >> >>
> >> >> It's actually caused by the fact I used a const void* shdr in the caller.
> >> >> I will check if this is mandatory.
> >> >>
> >> >> >
> >> >> >> +find_table(struct device *dev, const struct firmware *fw)
> >> >> >> {
> >> >> >> - struct elf32_shdr *shdr;
> >> >> >> + const void *shdr, *name_table_shdr;
> >> >> >> int i;
> >> >> >> const char *name_table;
> >> >> >> struct resource_table *table = NULL;
> >> >> >> - const u8 *elf_data = (void *)ehdr;
> >> >> >> + const u8 *elf_data = (void *)fw->data;
> >> >> >> + u8 class = fw_elf_get_class(fw);
> >> >> >> + size_t fw_size = fw->size;
> >> >> >> + const void *ehdr = elf_data;
> >> >> >> + u16 shnum = elf_hdr_e_shnum(class, ehdr);
> >> >> >> + u32 elf_shdr_size = elf_size_of_shdr(class);
> >> >> >> + u16 shstrndx = elf_hdr_e_shstrndx(class, ehdr);
> >> >> >>
> >> >> >> /* look for the resource table and handle it */
> >> >> >> - shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff);
> >> >> >> - name_table = elf_data + shdr[ehdr->e_shstrndx].sh_offset;
> >> >> >> + shdr = elf_data + elf_hdr_e_shoff(class, ehdr);
> >> >> >> + name_table_shdr = shdr + (shstrndx * elf_shdr_size);
> >> >> >> + name_table = elf_data + elf_shdr_sh_offset(class, name_table_shdr);
> >> >> >
> >> >> > It took me a while but I figured out what is happening here. To save me (and
> >> >> > other people) from going through the same mental process every time I look at
> >> >> > this code, please add a comment for each of the above 3 lines.
> >> >>
> >> >> Indeed.
> >> >>
> >> >> >
> >> >> >>
> >> >> >> - for (i = 0; i < ehdr->e_shnum; i++, shdr++) {
> >> >> >> - u32 size = shdr->sh_size;
> >> >> >> - u32 offset = shdr->sh_offset;
> >> >> >> + for (i = 0; i < shnum; i++, shdr += elf_shdr_size) {
> >> >> >> + u64 size = elf_shdr_sh_size(class, shdr);
> >> >> >> + u64 offset = elf_shdr_sh_offset(class, shdr);
> >> >> >> + u32 name = elf_shdr_sh_name(class, shdr);
> >> >> >>
> >> >> >> - if (strcmp(name_table + shdr->sh_name, ".resource_table"))
> >> >> >> + if (strcmp(name_table + name, ".resource_table"))
> >> >> >> continue;
> >> >> >>
> >> >> >> table = (struct resource_table *)(elf_data + offset);
> >> >> >> @@ -279,21 +306,21 @@ find_table(struct device *dev, struct elf32_hdr *ehdr,
> >> >> >> size_t fw_size)
> >> >> >> */
> >> >> >> int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw)
> >> >> >> {
> >> >> >> - struct elf32_hdr *ehdr;
> >> >> >> - struct elf32_shdr *shdr;
> >> >> >> + const void *shdr;
> >> >> >> struct device *dev = &rproc->dev;
> >> >> >> struct resource_table *table = NULL;
> >> >> >> const u8 *elf_data = fw->data;
> >> >> >> size_t tablesz;
> >> >> >> + u8 class = fw_elf_get_class(fw);
> >> >> >> + u64 sh_offset;
> >> >> >>
> >> >> >> - ehdr = (struct elf32_hdr *)elf_data;
> >> >> >> -
> >> >> >> - shdr = find_table(dev, ehdr, fw->size);
> >> >> >> + shdr = find_table(dev, fw);
> >> >> >> if (!shdr)
> >> >> >> return -EINVAL;
> >> >> >>
> >> >> >> - table = (struct resource_table *)(elf_data + shdr->sh_offset);
> >> >> >> - tablesz = shdr->sh_size;
> >> >> >> + sh_offset = elf_shdr_sh_offset(class, shdr);
> >> >> >> + table = (struct resource_table *)(elf_data + sh_offset);
> >> >> >> + tablesz = elf_shdr_sh_size(class, shdr);
> >> >> >>
> >> >> >> /*
> >> >> >> * Create a copy of the resource table. When a virtio device starts
> >> >> >> @@ -326,13 +353,17 @@ EXPORT_SYMBOL(rproc_elf_load_rsc_table);
> >> >> >> struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
> >> >> >> const struct firmware *fw)
> >> >> >> {
> >> >> >> - struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data;
> >> >> >> - struct elf32_shdr *shdr;
> >> >> >> + const void *shdr;
> >> >> >> + u64 sh_addr, sh_size;
> >> >> >> + u8 class = fw_elf_get_class(fw);
> >> >> >>
> >> >> >> - shdr = find_table(&rproc->dev, ehdr, fw->size);
> >> >> >> + shdr = find_table(&rproc->dev, fw);
> >> >> >> if (!shdr)
> >> >> >> return NULL;
> >> >> >>
> >> >> >> - return rproc_da_to_va(rproc, shdr->sh_addr, shdr->sh_size);
> >> >> >> + sh_addr = elf_shdr_sh_addr(class, shdr);
> >> >> >> + sh_size = elf_shdr_sh_size(class, shdr);
> >> >> >> +
> >> >> >> + return rproc_da_to_va(rproc, sh_addr, sh_size);
> >> >> >
> >> >> > The prototype for the above is as follow:
> >> >> >
> >> >> > void *rproc_da_to_va(struct rproc *rproc, u64 da, int len)
> >> >> >
> >> >> > But sh_size is a u64, which will cause problem that are hard to debug. I think
> >> >> > it is better to move 'len' to an 8 byte type along with the refactoring of the
> >> >> > existing code that is implied. I suggest to split this work in a preparatory
> >> >> > patch (that will still be part of this set).
> >> >>
> >> >> Nice catch ! I will do that.
> >> >>
> >> >> >
> >> >> >> }
> >> >> >> EXPORT_SYMBOL(rproc_elf_find_loaded_rsc_table);
> >> >> >> diff --git a/drivers/remoteproc/remoteproc_elf_loader.h
> >> >> >> b/drivers/remoteproc/remoteproc_elf_loader.h
> >> >> >> new file mode 100644
> >> >> >> index 000000000000..fac3565734f9
> >> >> >> --- /dev/null
> >> >> >> +++ b/drivers/remoteproc/remoteproc_elf_loader.h
> >> >> >> @@ -0,0 +1,69 @@
> >> >> >> +/* SPDX-License-Identifier: GPL-2.0 */
> >> >> >> +/*
> >> >> >> + * Remote processor elf loader defines
> >> >> >> + *
> >> >> >> + * Copyright (C) 2019 Kalray, Inc.
> >> >> >> + */
> >> >> >> +
> >> >> >> +#ifndef REMOTEPROC_ELF_LOADER_H
> >> >> >> +#define REMOTEPROC_ELF_LOADER_H
> >> >> >> +
> >> >> >> +#include <linux/elf.h>
> >> >> >> +#include <linux/types.h>
> >> >> >> +
> >> >> >> +/**
> >> >> >> + * fw_elf_get_class - Get elf class
> >> >> >> + * @fw: the ELF firmware image
> >> >> >> + *
> >> >> >> + * Note that we use and elf32_hdr to access the class since the start of the
> >> >> >> + * struct is the same for both elf class
> >> >> >> + *
> >> >> >> + * Return: elf class of the firmware
> >> >> >> + */
> >> >> >> +static inline u8 fw_elf_get_class(const struct firmware *fw)
> >> >> >> +{
> >> >> >> + struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data;
> >> >> >> +
> >> >> >> + return ehdr->e_ident[EI_CLASS];
> >> >> >> +}
> >> >> >> +
> >> >> >> +#define ELF_GET_FIELD(__s, __field, __type) \
> >> >> >> +static inline __type elf_##__s##_##__field(u8 class, const void *arg) \
> >> >> >> +{ \
> >> >> >> + if (class == ELFCLASS32) \
> >> >> >> + return (__type) ((const struct elf32_##__s *) arg)->__field; \
> >> >> >> + else \
> >> >> >> + return (__type) ((const struct elf64_##__s *) arg)->__field; \
> >> >> >> +}
> >> >> >> +
> >> >> >> +ELF_GET_FIELD(hdr, e_entry, u64)
> >> >> >> +ELF_GET_FIELD(hdr, e_phnum, u16)
> >> >> >> +ELF_GET_FIELD(hdr, e_shnum, u16)
> >> >> >> +ELF_GET_FIELD(hdr, e_phoff, u64)
> >> >> >> +ELF_GET_FIELD(hdr, e_shoff, u64)
> >> >> >> +ELF_GET_FIELD(hdr, e_shstrndx, u16)
> >> >> >> +
> >> >> >> +ELF_GET_FIELD(phdr, p_paddr, u64)
> >> >> >> +ELF_GET_FIELD(phdr, p_filesz, u64)
> >> >> >> +ELF_GET_FIELD(phdr, p_memsz, u64)
> >> >> >> +ELF_GET_FIELD(phdr, p_type, u32)
> >> >> >> +ELF_GET_FIELD(phdr, p_offset, u64)
> >> >> >> +
> >> >> >> +ELF_GET_FIELD(shdr, sh_size, u64)
> >> >> >> +ELF_GET_FIELD(shdr, sh_offset, u64)
> >> >> >> +ELF_GET_FIELD(shdr, sh_name, u32)
> >> >> >> +ELF_GET_FIELD(shdr, sh_addr, u64)
> >> >> >
> >> >> > I like how you did this.
> >> >> >
> >> >> >> +
> >> >> >> +#define ELF_STRUCT_SIZE(__s) \
> >> >> >> +static inline unsigned long elf_size_of_##__s(u8 class) \
> >> >> >> +{ \
> >> >> >> + if (class == ELFCLASS32)\
> >> >> >> + return sizeof(struct elf32_##__s); \
> >> >> >> + else \
> >> >> >> + return sizeof(struct elf64_##__s); \
> >> >> >> +}
> >> >> >> +
> >> >> >> +ELF_STRUCT_SIZE(shdr)
> >> >> >> +ELF_STRUCT_SIZE(phdr)
> >> >> >> +
> >> >> >> +#endif /* REMOTEPROC_ELF_LOADER_H */
> >> >> >> diff --git a/drivers/remoteproc/remoteproc_internal.h
> >> >> >> b/drivers/remoteproc/remoteproc_internal.h
> >> >> >> index 45ff76a06c72..4ef745e3a1bc 100644
> >> >> >> --- a/drivers/remoteproc/remoteproc_internal.h
> >> >> >> +++ b/drivers/remoteproc/remoteproc_internal.h
> >> >> >> @@ -63,7 +63,7 @@ phys_addr_t rproc_va_to_pa(void *cpu_addr);
> >> >> >> int rproc_trigger_recovery(struct rproc *rproc);
> >> >> >>
> >> >> >> int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
> >> >> >> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
> >> >> >> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
> >> >> >> int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
> >> >> >> int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw);
> >> >> >> struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
> >> >> >> diff --git a/drivers/remoteproc/st_remoteproc.c
> >> >> >> b/drivers/remoteproc/st_remoteproc.c
> >> >> >> index 51049d17b1e5..e23abd8a96b0 100644
> >> >> >> --- a/drivers/remoteproc/st_remoteproc.c
> >> >> >> +++ b/drivers/remoteproc/st_remoteproc.c
> >> >> >> @@ -193,7 +193,7 @@ static int st_rproc_start(struct rproc *rproc)
> >> >> >> }
> >> >> >> }
> >> >> >>
> >> >> >> - dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr);
> >> >> >> + dev_info(&rproc->dev, "Started from 0x%llx\n", rproc->bootaddr);
> >> >> >>
> >> >> >> return 0;
> >> >> >>
> >> >> >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> >> >> >> index 04d04709f2bd..512de9a2590c 100644
> >> >> >> --- a/include/linux/remoteproc.h
> >> >> >> +++ b/include/linux/remoteproc.h
> >> >> >> @@ -362,7 +362,7 @@ struct rproc_ops {
> >> >> >> struct rproc *rproc, const struct firmware *fw);
> >> >> >> int (*load)(struct rproc *rproc, const struct firmware *fw);
> >> >> >> int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
> >> >> >> - u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
> >> >> >> + u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
> >> >> >> };
> >> >> >>
> >> >> >> /**
> >> >> >> @@ -478,7 +478,7 @@ struct rproc {
> >> >> >> int num_traces;
> >> >> >> struct list_head carveouts;
> >> >> >> struct list_head mappings;
> >> >> >> - u32 bootaddr;
> >> >> >> + u64 bootaddr;
> >> >> >> struct list_head rvdevs;
> >> >> >> struct list_head subdevs;
> >> >> >> struct idr notifyids;
> >> >> >
> >> >> > Please hold off before doing another respin of this patch. While doing
> >> >> > something completely different I noticed TI also did some work in this area.
> >> >> > I'd like to take some time to look at their implementation and see if they carry
> >> >> > features that haven't been included here. I intend to do this tomorrow.
> >> >>
> >> >> Ok,
> >> >>
> >> >> Thanks for your review,
> >> >
> >> > As promised I looked at what Suman had done on his side [1] to support 64-bit
> >> > ELF
> >> > files. His approach to offer the same functionality but for 64 bit in a new file
> >> > is quick, simple and flexible. On the flip side it introduces code duplication,
> >> > something that is seriously frowned upon upstream.
> >> >
> >> > I did some soul searching in the kernel code and found very little in terms of
> >> > implementation that deals with both 32 and 64 bit ELF format. The most
> >> > convincing approach was set forth by the MIPS guys [2]. They too have decided
> >> > to support both types in the same functions, but I don't see us adding an if()
> >> > statement (and the code duplication that comes with it) every time we need to
> >> > deal with file types.
> >> >
> >> > Given the above I'm in favour of moving forward with your approach. One could
> >> > rightly argue the macros make the code harder to read but given the
> >> > alternatives, it seems to be the best solution.
> >> >
> >> > Mathieu
> >> >
> >> > [1]. https://bit.ly/2Rpmb4E
> >> > [2]. https://elixir.bootlin.com/linux/v5.5-rc6/source/arch/mips/kernel/elf.c#L75
> >> >>
> >> >> Clément
> >> >>
> >> >> >
> >> >> > Thanks,
> >> >> > Mathieu
> >> >> >
> >> >> >> --
> > > > > >> 2.15.0.276.g89ea799

\
 
 \ /
  Last update: 2020-01-29 17:30    [W:0.243 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site