lkml.org 
[lkml]   [2020]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v4] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
Date
Hi Matthias,

Please find my replies inline.


> -----Original Message-----
> From: Matthias Kaehlcke <mka@chromium.org>
> Sent: Wednesday, January 29, 2020 12:50 AM
> To: Rakesh Pillai <pillair@codeaurora.org>
> Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; linux-arm-msm@vger.kernel.org
> Subject: Re: [PATCH v4] arm64: dts: qcom: sc7180: Add WCN3990 WLAN
> module device node
>
> Hi Rakesh,
>
> On Tue, Jan 28, 2020 at 04:03:37PM +0530, Rakesh Pillai wrote:
> > Add device node for the ath10k SNOC platform driver probe
> > and add resources required for WCN3990 on sc7180 soc.
> >
> > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> > ---
> > arch/arm64/boot/dts/qcom/sc7180-idp.dts | 5 +++++
> > arch/arm64/boot/dts/qcom/sc7180.dtsi | 28
> ++++++++++++++++++++++++++++
> > 2 files changed, 33 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > index 189254f..151b489 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > @@ -248,6 +248,11 @@
> > status = "okay";
> > };
> >
> > +&wifi {
> > + status = "okay";
> > + qcom,msa-fixed-perm;
> > +};
> > +
> > /* PINCTRL - additions to nodes defined in sc7180.dtsi */
> >
> > &qup_i2c2_default {
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > index 666e9b9..7efb97f 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -42,6 +42,12 @@
> > compatible = "qcom,cmd-db";
> > no-map;
> > };
> > +
> > + wlan_fw_mem: memory@93900000 {
> > + compatible = "removed-dma-pool";
> > + no-map;
> > + reg = <0 0x93900000 0 0x200000>;
> > + };
> > };
>
> This part doesn't apply cleanly on qcom/for-next, looks like you have to
> rebase.

[Rakesh]: let me rebase it and send out the next version.

>
> > cpus {
> > @@ -1119,6 +1125,28 @@
> > #clock-cells = <1>;
> > };
> > };
> > +
> > + wifi: wifi@18800000 {
>
> You added this node at the end of the file, outside of the 'soc' node.
> It should be inside the 'soc' node, the sub-nodes are ordered by address,
> so (currently) this node should be inserted after 'cpufreq@18323000'.

[Rakesh] Will update this in the next patchset. (Possibly this was caused due to rebase conflicts)


>
> > + compatible = "qcom,wcn3990-wifi";
> > + reg = <0 0x18800000 0 0x800000>;
> > + reg-names = "membase";
> > + iommus = <&apps_smmu 0xC0 0x1>;
>
> nit: the convention is to use lowercase characters for hex adresses.

[Rakesh]: Will change it.

>
> > + interrupts =
> > + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0
> */ >,
> > + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1
> */ >,
> > + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2
> */ >,
> > + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3
> */ >,
> > + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4
> */ >,
> > + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5
> */ >,
> > + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6
> */ >,
> > + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7
> */ >,
> > + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8
> */ >,
> > + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9
> */ >,
> > + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10
> */>,
> > + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11
> */>;
>
> not sure these 'CEx' comments after each interrupt add much value. What
> does
> 'CE' stand for in the first place?

[Rakesh]: CE stands for Copy engine. These are the copy engine interrupts, hence the comments.

>
> Thanks
>
> Matthias

\
 
 \ /
  Last update: 2020-01-29 06:47    [W:0.048 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site