lkml.org 
[lkml]   [2020]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 031/104] net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path
Date
From: Tariq Toukan <tariqt@mellanox.com>

commit 342508c1c7540e281fd36151c175ba5ff954a99f upstream.

When TCP out-of-order is identified (unexpected tcp seq mismatch), driver
analyzes the packet and decides what handling should it get:
1. go to accelerated path (to be encrypted in HW),
2. go to regular xmit path (send w/o encryption),
3. drop.

Packets marked with skb->decrypted by the TLS stack in the TX flow skips
SW encryption, and rely on the HW offload.
Verify that such packets are never sent un-encrypted on the wire.
Add a WARN to catch such bugs, and prefer dropping the packet in these cases.

Fixes: 46a3ea98074e ("net/mlx5e: kTLS, Enhance TX resync flow")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c | 14 +++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c
@@ -458,12 +458,18 @@ struct sk_buff *mlx5e_ktls_handle_tx_skb
enum mlx5e_ktls_sync_retval ret =
mlx5e_ktls_tx_handle_ooo(priv_tx, sq, datalen, seq);

- if (likely(ret == MLX5E_KTLS_SYNC_DONE))
+ switch (ret) {
+ case MLX5E_KTLS_SYNC_DONE:
*wqe = mlx5e_sq_fetch_wqe(sq, sizeof(**wqe), pi);
- else if (ret == MLX5E_KTLS_SYNC_FAIL)
+ break;
+ case MLX5E_KTLS_SYNC_SKIP_NO_DATA:
+ if (likely(!skb->decrypted))
+ goto out;
+ WARN_ON_ONCE(1);
+ /* fall-through */
+ default: /* MLX5E_KTLS_SYNC_FAIL */
goto err_out;
- else /* ret == MLX5E_KTLS_SYNC_SKIP_NO_DATA */
- goto out;
+ }
}

priv_tx->expected_seq = seq + datalen;

\
 
 \ /
  Last update: 2020-01-28 15:03    [W:0.649 / U:2.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site