lkml.org 
[lkml]   [2020]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4.19 000/639] 4.19.99-stable review
On Mon, Jan 27, 2020 at 09:38:17AM +0000, Jon Hunter wrote:
>
> On 26/01/2020 09:13, Greg Kroah-Hartman wrote:
> > On Sat, Jan 25, 2020 at 07:46:47AM -0800, Guenter Roeck wrote:
> >> On 1/25/20 3:32 AM, Jon Hunter wrote:
> >>>
> >>> On 24/01/2020 18:07, Jon Hunter wrote:
> >>>>
> >>>> On 24/01/2020 17:36, Greg Kroah-Hartman wrote:
> >>>>> On Fri, Jan 24, 2020 at 02:50:05PM +0000, Jon Hunter wrote:
> >>>>>> Hi Greg,
> >>>>>>
> >>>>>> On 24/01/2020 09:22, Greg Kroah-Hartman wrote:
> >>>>>>> This is the start of the stable review cycle for the 4.19.99 release.
> >>>>>>> There are 639 patches in this series, all will be posted as a response
> >>>>>>> to this one. If anyone has any issues with these being applied, please
> >>>>>>> let me know.
> >>>>>>>
> >>>>>>> Responses should be made by Sun, 26 Jan 2020 09:26:29 +0000.
> >>>>>>> Anything received after that time might be too late.
> >>>>>>>
> >>>>>>> The whole patch series can be found in one patch at:
> >>>>>>> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.99-rc1.gz
> >>>>>>> or in the git tree and branch at:
> >>>>>>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> >>>>>>> and the diffstat can be found below.
> >>>>>>>
> >>>>>>> thanks,
> >>>>>>>
> >>>>>>> greg k-h
> >>>>>>>
> >>>>>>> -------------
> >>>>>>> Pseudo-Shortlog of commits:
> >>>>>>
> >>>>>> ...
> >>>>>>
> >>>>>>> Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >>>>>>> PCI: PM: Skip devices in D0 for suspend-to-idle
> >>>>>>
> >>>>>> The above commit is causing a suspend regression on Tegra124 Jetson-TK1.
> >>>>>> Reverting this on top of v4.19.99-rc1 fixes the issue.
> >>>>>
> >>>>> This is also in the 4.14 queue, so should I drop it there too?
> >>>>
> >>>> I did not see any failures with the same board on that branch, so I
> >>>> would say no, but odd that it only fails here. It was failing for me
> >>>> 100% so I would have expected to see if there too if it was a problem.
> >>>
> >>> Hmmm, rc2 still not working for me ...
> >>>
> >>> Test results for stable-v4.19:
> >>> 11 builds: 11 pass, 0 fail
> >>> 22 boots: 22 pass, 0 fail
> >>> 32 tests: 30 pass, 2 fail
> >>>
> >>> Linux version: 4.19.99-rc2-g24832ad2c623
> >>> Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
> >>> tegra194-p2972-0000, tegra20-ventana,
> >>> tegra210-p2371-2180, tegra30-cardhu-a04
> >>>
> >>> I still see the following commit in rc2 ...
> >>>
> >>> commit bb52152abe85f971278a7a4f033b29483f64bfdb
> >>> Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >>> Date: Thu Jun 13 23:59:45 2019 +0200
> >>>
> >>> PCI: PM: Skip devices in D0 for suspend-to-idle
> >
> > Yes, I did not change anything in -rc2 for you, sorry.
> >
> >>> BTW, I checked the 4.14. queue and I do not see the above change in
> >>> there, however, there is similar change ...
> >>>
> >>> Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >>> PCI: PM: Avoid possible suspend-to-idle issue
> >>>
> >> bb52152abe85 fixes this one, which in turn fixes 33e4f80ee69b.
> >> The above in 4.14 but not its fixes is spelling a bit of trouble.
> >>
> >> Maybe commit 471a739a47aa7 ("PCI: PM: Avoid skipping bus-level
> >> PM on platforms without ACPI") was added to -rc2, since it is
> >> supposed to fix bb52152abe85.
> >
> > I have added that fix to 4.14 now, and will go push out a -rc3 for both
> > 4.19.y and 4.14.y to try to sync up on this and figure it out.
> >
> > Jon, if you could retest 4.14.y, that would be great, to see if it has
> > the same issue that 4.19.y has. And if so, that means I should probably
> > just drop both patches from both trees, right?
>
>
> So v4.19 is still failing for me ...
>
> Test results for stable-v4.19:
> 11 builds: 11 pass, 0 fail
> 22 boots: 22 pass, 0 fail
> 32 tests: 30 pass, 2 fail
>
> Linux version: 4.19.99-rc3-g041f280e6a1a
> Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
> tegra194-p2972-0000, tegra20-ventana,
> tegra210-p2371-2180, tegra30-cardhu-a04
>
> However, I am not seeing any issues with v4.14, so still not clear what
> is going on here.

Ugh, odd. Ok, I'll go drop both patches from both trees and do some
releases in a few hours and then try adding them back so we can do a bit
more debugging without the deadline of the release being on us.

thanks so much for letting me know!

greg k-h

\
 
 \ /
  Last update: 2020-01-27 10:42    [W:0.389 / U:1.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site