lkml.org 
[lkml]   [2020]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] spi: spi-nxp-fspi: Enable the Octal Mode in MCR0
Date
From: Han Xu <han.xu@nxp.com>

Apply patch from NXP upstream repo to
Enable the octal combination mode in MCR0

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Han Xu <han.xu@nxp.com>

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index 23abf5ae318e..019f40e2917c 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -913,8 +913,9 @@ static int nxp_fspi_default_setup(struct nxp_fspi *f)
fspi_writel(f, FSPI_DLLBCR_OVRDEN, base + FSPI_DLLBCR);

/* enable module */
- fspi_writel(f, FSPI_MCR0_AHB_TIMEOUT(0xFF) | FSPI_MCR0_IP_TIMEOUT(0xFF),
- base + FSPI_MCR0);
+ fspi_writel(f, FSPI_MCR0_AHB_TIMEOUT(0xFF) |
+ FSPI_MCR0_IP_TIMEOUT(0xFF) | (u32) FSPI_MCR0_OCTCOMB_EN,
+ base + FSPI_MCR0);

/*
* Disable same device enable bit and configure all slave devices
--
2.24.0
\
 
 \ /
  Last update: 2020-01-26 15:11    [W:0.066 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site