lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 365/639] pwm: meson: Consider 128 a valid pre-divider
Date
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 51496e4446875726d50a5617a6e0e0dabbc2e6da ]

The pre-divider allows configuring longer PWM periods compared to using
the input clock directly. The pre-divider is 7 bit wide, meaning it's
maximum value is 128 (the register value is off-by-one: 0x7f or 127).

Change the loop to also allow for the maximum possible value to be
considered valid.

Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pwm/pwm-meson.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index f6e738ad7bd92..4b708c1fcb1d2 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -188,7 +188,7 @@ static int meson_pwm_calc(struct meson_pwm *meson,
do_div(fin_ps, fin_freq);

/* Calc pre_div with the period */
- for (pre_div = 0; pre_div < MISC_CLK_DIV_MASK; pre_div++) {
+ for (pre_div = 0; pre_div <= MISC_CLK_DIV_MASK; pre_div++) {
cnt = DIV_ROUND_CLOSEST_ULL((u64)period * 1000,
fin_ps * (pre_div + 1));
dev_dbg(meson->chip.dev, "fin_ps=%llu pre_div=%u cnt=%u\n",
@@ -197,7 +197,7 @@ static int meson_pwm_calc(struct meson_pwm *meson,
break;
}

- if (pre_div == MISC_CLK_DIV_MASK) {
+ if (pre_div > MISC_CLK_DIV_MASK) {
dev_err(meson->chip.dev, "unable to get period pre_div\n");
return -EINVAL;
}
--
2.20.1


\
 
 \ /
  Last update: 2020-01-24 12:20    [W:1.723 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site