lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 167/639] ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage
Date
From: Vladimir Zapolskiy <vz@mleia.com>

[ Upstream commit dc141b99fc36cf910a1d8d5ee30f43f2442fd1bd ]

The fixed voltage regulator on Phytec phyCORE-LPC3250 board, which
supplies SD/MMC card's power, has a constant output voltage level
of either 3.15V or 3.3V, the actual value depends on JP4 position,
the power rail is referenced as VCC_SDIO in the board hardware manual.

Fixes: d06670e96267 ("arm: dts: phy3250: add SD fixed regulator")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/lpc3250-phy3250.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
index 1e1c2f517a82b..ffcf78631b226 100644
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/lpc3250-phy3250.dts
@@ -49,8 +49,8 @@
sd_reg: regulator@2 {
compatible = "regulator-fixed";
regulator-name = "sd_reg";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
gpio = <&gpio 5 5 0>;
enable-active-high;
};
--
2.20.1


\
 
 \ /
  Last update: 2020-01-24 12:08    [W:1.371 / U:6.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site