lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 014/102] i2c: stm32f7: rework slave_id allocation
Date
From: Alain Volmat <alain.volmat@st.com>

commit 52d3be711e065a97a57c2f2ffba3098748855bd6 upstream.

The IP can handle two slave addresses. One address can either be
7 bits or 10 bits while the other can only be 7 bits.
In order to ensure that a 10 bits address can always be allocated
(assuming there is only one 7 bits address already allocated),
pick up the 7-bits only address slot in priority when performing a 7-bits
address allocation.

Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support")
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/i2c/busses/i2c-stm32f7.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1267,7 +1267,7 @@ static int stm32f7_i2c_get_free_slave_id
* slave[0] supports 7-bit and 10-bit slave address
* slave[1] supports 7-bit slave address only
*/
- for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) {
if (i == 1 && (slave->flags & I2C_CLIENT_PEC))
continue;
if (!i2c_dev->slave[i]) {

\
 
 \ /
  Last update: 2020-01-24 10:35    [W:0.282 / U:2.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site