lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 626/639] i2c: stm32f7: report dma error during probe
Date
From: Alain Volmat <alain.volmat@st.com>

[ Upstream commit d77eceb2de99f5d7e0c645bad15511fe1af59e09 ]

Distinguish between the case where dma information is not provided
within the DT and the case of an error during the dma init.
Exit the probe with error in case of an error during dma init.

Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-stm32.c | 16 ++++++++--------
drivers/i2c/busses/i2c-stm32f7.c | 9 +++++++++
2 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
index d75fbcbf02ef3..667f8032f8ef6 100644
--- a/drivers/i2c/busses/i2c-stm32.c
+++ b/drivers/i2c/busses/i2c-stm32.c
@@ -21,13 +21,13 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,

dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
if (!dma)
- return NULL;
+ return ERR_PTR(-ENOMEM);

/* Request and configure I2C TX dma channel */
- dma->chan_tx = dma_request_slave_channel(dev, "tx");
- if (!dma->chan_tx) {
+ dma->chan_tx = dma_request_chan(dev, "tx");
+ if (IS_ERR(dma->chan_tx)) {
dev_dbg(dev, "can't request DMA tx channel\n");
- ret = -EINVAL;
+ ret = PTR_ERR(dma->chan_tx);
goto fail_al;
}

@@ -43,10 +43,10 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
}

/* Request and configure I2C RX dma channel */
- dma->chan_rx = dma_request_slave_channel(dev, "rx");
- if (!dma->chan_rx) {
+ dma->chan_rx = dma_request_chan(dev, "rx");
+ if (IS_ERR(dma->chan_rx)) {
dev_err(dev, "can't request DMA rx channel\n");
- ret = -EINVAL;
+ ret = PTR_ERR(dma->chan_rx);
goto fail_tx;
}

@@ -76,7 +76,7 @@ fail_al:
devm_kfree(dev, dma);
dev_info(dev, "can't use DMA\n");

- return NULL;
+ return ERR_PTR(ret);
}

void stm32_i2c_dma_free(struct stm32_i2c_dma *dma)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index e6bbb8ca70905..eb7e533b0dd47 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1914,6 +1914,15 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
i2c_dev->dma = stm32_i2c_dma_request(i2c_dev->dev, phy_addr,
STM32F7_I2C_TXDR,
STM32F7_I2C_RXDR);
+ if (PTR_ERR(i2c_dev->dma) == -ENODEV)
+ i2c_dev->dma = NULL;
+ else if (IS_ERR(i2c_dev->dma)) {
+ ret = PTR_ERR(i2c_dev->dma);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Failed to request dma error %i\n", ret);
+ goto clk_free;
+ }

ret = i2c_add_adapter(adap);
if (ret)
--
2.20.1


\
 
 \ /
  Last update: 2020-01-24 12:36    [W:1.867 / U:2.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site