[lkml]   [2020]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 1/2] ARM: dts: Move interconnect target module for omap3 sgx to separate dtsi files
Am 02.01.20 um 20:33 schrieb Tony Lindgren:
> * André Hentschel <> [191230 20:22]:
>> Only dm3730 and am3715 come with SGX support
> AFAIK dm3730 is just a marketing name for a catalog version of
> omap3630. So using omap36xx.dtsi is correct and we should not
> change that.
> Can you please just add a minimal dm3725.dtsi that your board dts
> can include and avoid disabling sgx in the board specific file?
> That is assuming you have dm3725 with dsp and isp but no sgx.

I removed the sgx disable part already in 2/2.
Consulting my table:
DM3730 | DM3725 | AM3715 | AM3703
DSP X | X | |
SGX X | | X |
Where X is "supported"

So including omap63xx.dtsi seems right after this patch moves the
sgx part to separate dtsi. Or do you want to have the sxg
disabling in the dm3725.dtsi?

> You can read the detected SoC with:
> # cat /sys/bus/soc/devices/soc0/machine

# cat /sys/bus/soc/devices/soc0/machine
# cat /sys/bus/soc/devices/soc0/revision

 \ /
  Last update: 2020-01-02 22:16    [W:0.048 / U:1.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site