lkml.org 
[lkml]   [2020]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] reset: Add Broadcom STB RESCAL reset controller
Date
Hi Philipp,

This patch series adds support for the BCM7216 RESCAL reset controller
which is necessary to initialize SATA and PCIe0/1 on that chip.

Please let us know if you have any comments. Thanks!

Changes in v2:

- binding document is in YAML format per Rob's suggestion
- indented bit definitions the same way for all definitions
- moved reset logic to the .reset() callback
- removed the XOR operation which is not necessary after clarifying with
Jim that this was not necessary
- use readl_poll_timeout()

Jim Quinlan (2):
dt-bindings: reset: Document BCM7216 RESCAL reset controller
reset: Add Broadcom STB RESCAL reset controller

.../reset/brcm,bcm7216-pcie-sata-rescal.yaml | 37 ++++++
drivers/reset/Kconfig | 7 ++
drivers/reset/Makefile | 1 +
drivers/reset/reset-brcmstb-rescal.c | 110 ++++++++++++++++++
4 files changed, 155 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
create mode 100644 drivers/reset/reset-brcmstb-rescal.c

--
2.17.1

\
 
 \ /
  Last update: 2020-01-03 00:15    [W:0.042 / U:4.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site