[lkml]   [2020]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v7 1/4] x86: kdump: move reserve_crashkernel_low() into crash_core.c

> On Jan 16, 2020, at 9:17 AM, James Morse <> wrote:
> Hi guys,
> On 28/12/2019 09:32, Dave Young wrote:
>> On 12/27/19 at 07:04pm, Chen Zhou wrote:
>>> On 2019/12/27 13:54, Dave Young wrote:
>>>> On 12/23/19 at 11:23pm, Chen Zhou wrote:
>>>>> In preparation for supporting reserve_crashkernel_low in arm64 as
>>>>> x86_64 does, move reserve_crashkernel_low() into kernel/crash_core.c.
>>>>> Note, in arm64, we reserve low memory if and only if crashkernel=X,low
>>>>> is specified. Different with x86_64, don't set low memory automatically.
>>>> Do you have any reason for the difference? I'd expect we have same
>>>> logic if possible and remove some of the ifdefs.
>>> In x86_64, if we reserve crashkernel above 4G, then we call reserve_crashkernel_low()
>>> to reserve low memory.
>>> In arm64, to simplify, we call reserve_crashkernel_low() at the beginning of reserve_crashkernel()
>>> and then relax the arm64_dma32_phys_limit if reserve_crashkernel_low() allocated something.
>>> In this case, if reserve crashkernel below 4G there will be 256M low memory set automatically
>>> and this needs extra considerations.
>> Sorry that I did not read the old thread details and thought that is
>> arch dependent. But rethink about that, it would be better that we can
>> have same semantic about crashkernel parameters across arches. If we
>> make them different then it causes confusion, especially for
>> distributions.
> Surely distros also want one crashkernel* string they can use on all platforms without
> having to detect the kernel version, platform or changeable memory layout...
>> OTOH, I thought if we reserve high memory then the low memory should be
>> needed. There might be some exceptions, but I do not know the exact
>> one,
>> can we make the behavior same, and special case those systems which
>> do not need low memory reservation.
> Its tricky to work out which systems are the 'normal' ones.
> We don't have a fixed memory layout for arm64. Some systems have no memory below 4G.
> Others have no memory above 4G.
> Chen Zhou's machine has some memory below 4G, but its too precious to reserve a large
> chunk for kdump. Without any memory below 4G some of the drivers won't work.
> I don't see what distros can set as their default for all platforms if high/low are
> mutually exclusive with the 'crashkernel=' in use today. How did x86 navigate this, ... or
> was it so long ago?
> No one else has reported a problem with the existing placement logic, hence treating this
> 'low' thing as the 'in addition' special case.


I am seeing similar Arm crash dump issues on 5.4 kernels where we need rather large amount of crashkernel memory reserved that is not available below 4GB ( The maximum reserved size appears to be around 768M ) . When I pick memory range higher than 4GB , I see adapters that fail to initialize :

There is no low-memory <4G memory for DMA ;

[ 11.506792] kworker/0:14: page allocation failure: order:0,
mode:0x104(GFP_DMA32|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0
[ 11.518793] CPU: 0 PID: 150 Comm: kworker/0:14 Not tainted
5.4.0-1948.3.el8uek.aarch64 #1
[ 11.526955] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS
0ACKL025 01/18/2019
[ 11.534948] Workqueue: events work_for_cpu_fn
[ 11.539291] Call trace:
[ 11.541727] dump_backtrace+0x0/0x18c
[ 11.545376] show_stack+0x24/0x30
[ 11.548679] dump_stack+0xbc/0xe0
[ 11.551982] warn_alloc+0xf0/0x15c
[ 11.555370] __alloc_pages_slowpath+0xb4c/0xb84
[ 11.559887] __alloc_pages_nodemask+0x2d0/0x330
[ 11.564405] alloc_pages_current+0x8c/0xf8
[ 11.568496] ttm_bo_device_init+0x188/0x220 [ttm]
[ 11.573187] drm_vram_mm_init+0x58/0x80 [drm_vram_helper]
[ 11.578572] drm_vram_helper_alloc_mm+0x64/0xb0 [drm_vram_helper]
[ 11.584655] ast_mm_init+0x38/0x80 [ast]
[ 11.588566] ast_driver_load+0x474/0xa70 [ast]
[ 11.593029] drm_dev_register+0x144/0x1c8 [drm]
[ 11.597573] drm_get_pci_dev+0xa4/0x168 [drm]
[ 11.601919] ast_pci_probe+0x8c/0x9c [ast]
[ 11.606004] local_pci_probe+0x44/0x98
[ 11.609739] work_for_cpu_fn+0x20/0x30
[ 11.613474] process_one_work+0x1c4/0x41c
[ 11.617470] worker_thread+0x150/0x4b0
[ 11.621206] kthread+0x110/0x114
[ 11.624422] ret_from_fork+0x10/0x18

This failure is related to a graphics adapter.

The more complex kdump configurations that use networking stack to NFS mount a filesystem to dump to , or use ssh to copy to another machine, require more crashkernel memory reservations than perhaps the “default*” settings of a minimal kdump that creates a minimal vmcore to local storage in /var/crash. If crashkernel is too small I get Out of Memory issues and the entire vmcore process fails.

( *default kdump setting I assume are a minimal vmcore to /var/crash using primary boot device where /root is located )

>>> previous discusses:
>> Another concern from James:
>> "
>> With both crashk_low_res and crashk_res, we end up with two entries in /proc/iomem called
>> "Crash kernel". Because its sorted by address, and kexec-tools stops searching when it
>> find "Crash kernel", you are always going to get the kernel placed in the lower portion.
>> "
>> The kexec-tools code is iterating all "Crash kernel" ranges and add them
>> in an array. In X86 code, it uses the higher range to locate memory.
> Then my hurried reading of what the user-space code does was wrong!
> If kexec-tools places the kernel in the low region, there may not be enough memory left
> for whatever purpose it was reserved for. This was the motivation for giving it a
> different name.
> Thanks,
> James
> _______________________________________________
> kexec mailing list

 \ /
  Last update: 2020-01-16 16:49    [W:0.169 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site