[lkml]   [2020]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v6 0/5] add Amlogic A1 clock controller driver
add support for Amlogic A1 clock driver, the clock includes 
three parts: peripheral clocks, pll clocks, CPU clocks.
sys pll and CPU clocks will be sent in next patch.

Changes since v5 at [6]:
-fix yaml file
-add rst/current_en/l_detect parm detection
-remove 'meson_eeclkc_data' in a1.c and a1-pll.c

Changes since v4 at [5]:
- change yaml GPL
- drop meson-eeclk.c patch, add probe function in each driver
- add CLK_IS_CRITICAL for sys_clk clock, drop the flag for sys_a and sys_b
- add new parm for pll, add protection for rst parm
- drop flag for a1_fixed_pll
- remove the same comment for fclk_div, add "refer to"
- add critical flag for a1_sys_clk
- remove rtc table
- rename a1_dspa_en_dspa and a1_dspb_en_dspb
- remove useless comment

Changes since v3 at [3]:
-fix reparenting orphan failed, it depends on jerome's patch [4]
-fix changelist in v3 about reparenting orphan
-remove the dts patch

Changes since v2 at [2]:
-add probe function for A1
-seperate the clock driver into two patch
-change some clock flags and ops
-add support for a1 PLL ops
-add A1 clock node
-fix reparenting orphan clock failed, registering xtal_fixpll
and xtal_hifipll after the provider registration, it is not
a best way.

Changes since v1 at [1]:
-place A1 config alphabetically
-add actual reason for RO ops, CLK_IS_CRITICAL, CLK_IGNORE_UNUSED
-separate the driver into two driver: peripheral and pll driver
-delete CLK_IGNORE_UNUSED flag for pwm b/c/d/e/f clock, dsp clock
-delete the change in Kconfig.platforms, address to Kevin alone
-remove the useless comments
-modify the meson pll driver to support A1 PLLs


Jian Hu (5):
dt-bindings: clock: meson: add A1 PLL clock controller bindings
clk: meson: add support for A1 PLL clock ops
clk: meson: a1: add support for Amlogic A1 PLL clock driver
dt-bindings: clock: meson: add A1 peripheral clock controller bindings
clk: meson: a1: add support for Amlogic A1 Peripheral clock driver

.../bindings/clock/amlogic,a1-clkc.yaml | 64 +
.../bindings/clock/amlogic,a1-pll-clkc.yaml | 54 +
drivers/clk/meson/Kconfig | 18 +
drivers/clk/meson/Makefile | 2 +
drivers/clk/meson/a1-pll.c | 360 +++
drivers/clk/meson/a1-pll.h | 56 +
drivers/clk/meson/a1.c | 2249 +++++++++++++++++
drivers/clk/meson/a1.h | 120 +
drivers/clk/meson/clk-pll.c | 47 +-
drivers/clk/meson/clk-pll.h | 2 +
include/dt-bindings/clock/a1-clkc.h | 98 +
include/dt-bindings/clock/a1-pll-clkc.h | 16 +
12 files changed, 3079 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
create mode 100644 drivers/clk/meson/a1-pll.c
create mode 100644 drivers/clk/meson/a1-pll.h
create mode 100644 drivers/clk/meson/a1.c
create mode 100644 drivers/clk/meson/a1.h
create mode 100644 include/dt-bindings/clock/a1-clkc.h
create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h


 \ /
  Last update: 2020-01-16 09:05    [W:0.150 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site