lkml.org 
[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/6] dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
Date
Add 7216b0 with supports CQE, HS400, HS400-ES and SDR104.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
.../bindings/mmc/brcm,sdhci-brcmstb.txt | 41 +++++++++++++------
1 file changed, 28 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
index 733b64a4d8eb..ae2074184528 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
@@ -11,28 +11,43 @@ Required properties:
- compatible: should be one of the following
- "brcm,bcm7425-sdhci"
- "brcm,bcm7445-sdhci"
+ - "brcm,bcm7216-sdhci"

Refer to clocks/clock-bindings.txt for generic clock consumer properties.

Example:

- sdhci@f03e0100 {
- compatible = "brcm,bcm7425-sdhci";
- reg = <0xf03e0000 0x100>;
- interrupts = <0x0 0x26 0x0>;
- sdhci,auto-cmd12;
- clocks = <&sw_sdio>;
+ sdhci@84b0000 {
sd-uhs-sdr50;
sd-uhs-ddr50;
+ sd-uhs-sdr104;
+ sdhci,auto-cmd12;
+ compatible = "brcm,bcm7216-sdhci",
+ "brcm,bcm7445-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x84b0000 0x260 0x84b0300 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <0x0 0x26 0x4>;
+ interrupt-names = "sdio0_0";
+ clocks = <&scmi_clk 245>;
+ clock-names = "sw_sdio";
};

- sdhci@f03e0300 {
+ sdhci@84b1000 {
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ supports-cqe;
non-removable;
bus-width = <0x8>;
- compatible = "brcm,bcm7425-sdhci";
- reg = <0xf03e0200 0x100>;
- interrupts = <0x0 0x27 0x0>;
- sdhci,auto-cmd12;
- clocks = <sw_sdio>;
- mmc-hs200-1_8v;
+ compatible = "brcm,bcm7216-sdhci",
+ "brcm,bcm7445-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x84b1000 0x260 0x84b1300 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <0x0 0x27 0x4>;
+ interrupt-names = "sdio1_0";
+ clocks = <&scmi_clk 245>;
+ clock-names = "sw_sdio";
};
--
2.17.1
\
 
 \ /
  Last update: 2020-01-13 22:08    [W:0.085 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site