lkml.org 
[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Freedreno] [PATCH 2/2] drm/msm: Add MSM_WAIT_IOVA ioctl
On Mon, Jan 13, 2020 at 9:51 AM Jordan Crouse <jcrouse@codeaurora.org> wrote:
>
> On Mon, Jan 13, 2020 at 10:36:05AM -0500, Brian Ho wrote:
> > Implements an ioctl to wait until a value at a given iova is greater
> > than or equal to a supplied value.
> >
> > This will initially be used by turnip (open-source Vulkan driver for
> > QC in mesa) for occlusion queries where the userspace driver can
> > block on a query becoming available before continuing via
> > vkGetQueryPoolResults.
> >
> > Signed-off-by: Brian Ho <brian@brkho.com>
> > ---
> > drivers/gpu/drm/msm/msm_drv.c | 63 +++++++++++++++++++++++++++++++++--
> > include/uapi/drm/msm_drm.h | 13 ++++++++
> > 2 files changed, 74 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> > index c84f0a8b3f2c..dcc46874a5a2 100644
> > --- a/drivers/gpu/drm/msm/msm_drv.c
> > +++ b/drivers/gpu/drm/msm/msm_drv.c
> > @@ -36,10 +36,11 @@
> > * MSM_GEM_INFO ioctl.
> > * - 1.4.0 - softpin, MSM_RELOC_BO_DUMP, and GEM_INFO support to set/get
> > * GEM object's debug name
> > - * - 1.5.0 - Add SUBMITQUERY_QUERY ioctl
> > + * - 1.5.0 - Add SUBMITQUEUE_QUERY ioctl
> > + * - 1.6.0 - Add WAIT_IOVA ioctl
> > */
> > #define MSM_VERSION_MAJOR 1
> > -#define MSM_VERSION_MINOR 5
> > +#define MSM_VERSION_MINOR 6
> > #define MSM_VERSION_PATCHLEVEL 0
> >
> > static const struct drm_mode_config_funcs mode_config_funcs = {
> > @@ -952,6 +953,63 @@ static int msm_ioctl_submitqueue_close(struct drm_device *dev, void *data,
> > return msm_submitqueue_remove(file->driver_priv, id);
> > }
> >
> > +static int msm_ioctl_wait_iova(struct drm_device *dev, void *data,
> > + struct drm_file *file)
> > +{
> > + struct msm_drm_private *priv = dev->dev_private;
> > + struct drm_gem_object *obj;
> > + struct drm_msm_wait_iova *args = data;
> > + ktime_t timeout = to_ktime(args->timeout);
> > + unsigned long remaining_jiffies = timeout_to_jiffies(&timeout);
> > + struct msm_gpu *gpu = priv->gpu;
> > + void *base_vaddr;
> > + uint64_t *vaddr;
> > + int ret;
> > +
> > + if (args->pad)
> > + return -EINVAL;
> > +
> > + if (!gpu)
> > + return 0;
>
> If the GPU isn't up, it should be an error since this macro is specifically
> designed for just the GPU (though, I suppose the display *COULD* use it to watch
> a memory mapped register or something).
>
> > +
> > + obj = drm_gem_object_lookup(file, args->handle);
> > + if (!obj)
> > + return -ENOENT;
> > +
> > + base_vaddr = msm_gem_get_vaddr(obj);
> > + if (IS_ERR(base_vaddr)) {
> > + ret = PTR_ERR(base_vaddr);
> > + goto err_put_gem_object;
> > + }
> > + if (args->offset + sizeof(*vaddr) > obj->size) {
>
> There is a chance to trigger a u64 overflow here resulting in an arbitrary (ish)
> vaddr two lines below.
>
>
> > + ret = -EINVAL;
> > + goto err_put_vaddr;
> > + }
>
> You can check this before getting the vaddr which would save you a clean up
> step.
>
> > +
> > + vaddr = base_vaddr + args->offset;
> > +
> > + /* Assumes WC mapping */
> > + ret = wait_event_interruptible_timeout(
> > + gpu->event, *vaddr >= args->value, remaining_jiffies);
>
> I feel like a barrier might be needed before checking *vaddr just in case you
> get the interrupt and wake up the queue before the write posts from the
> hardware.
>
> > +
>
> > + if (ret == 0) {
> > + ret = -ETIMEDOUT;
> > + goto err_put_vaddr;
> > + } else if (ret == -ERESTARTSYS) {
> > + goto err_put_vaddr;
> > + }
>
> You don't need either goto here because both paths execute the following cleanup
> steps. I'm also not sure you need to worry about explicitly checking the
> ERESTARTSYS value, I think that this would be sufficient:
>
> if (ret == 0)
> ret = -ETIMEDOUT;
> else if (ret > 0)
> ret = 0;
>
> > +
>
> Put your err_put_vaddr: label here, but looking up, if you move the bounds check
> before the msm_gem_get_vaddr, I don't think you need a label.
>
> > + msm_gem_put_vaddr(obj);
>
> Put the err_put_gem_object: label here.
>
> > + drm_gem_object_put_unlocked(obj);
> > + return 0;
>
> return ret;
>
> > +
> > +err_put_vaddr:
> > + msm_gem_put_vaddr(obj);
> > +err_put_gem_object:
> > + drm_gem_object_put_unlocked(obj);
> > + return ret;
> > +}
>
> And then these guys aren't needed.
>
> > +
> > static const struct drm_ioctl_desc msm_ioctls[] = {
> > DRM_IOCTL_DEF_DRV(MSM_GET_PARAM, msm_ioctl_get_param, DRM_RENDER_ALLOW),
> > DRM_IOCTL_DEF_DRV(MSM_GEM_NEW, msm_ioctl_gem_new, DRM_RENDER_ALLOW),
> > @@ -964,6 +1022,7 @@ static const struct drm_ioctl_desc msm_ioctls[] = {
> > DRM_IOCTL_DEF_DRV(MSM_SUBMITQUEUE_NEW, msm_ioctl_submitqueue_new, DRM_RENDER_ALLOW),
> > DRM_IOCTL_DEF_DRV(MSM_SUBMITQUEUE_CLOSE, msm_ioctl_submitqueue_close, DRM_RENDER_ALLOW),
> > DRM_IOCTL_DEF_DRV(MSM_SUBMITQUEUE_QUERY, msm_ioctl_submitqueue_query, DRM_RENDER_ALLOW),
> > + DRM_IOCTL_DEF_DRV(MSM_WAIT_IOVA, msm_ioctl_wait_iova, DRM_RENDER_ALLOW),
> > };
> >
> > static const struct vm_operations_struct vm_ops = {
> > diff --git a/include/uapi/drm/msm_drm.h b/include/uapi/drm/msm_drm.h
> > index 0b85ed6a3710..8477f28a4ee1 100644
> > --- a/include/uapi/drm/msm_drm.h
> > +++ b/include/uapi/drm/msm_drm.h
> > @@ -298,6 +298,17 @@ struct drm_msm_submitqueue_query {
> > __u32 pad;
> > };
> >
> > +/* This ioctl blocks until the u64 value at bo + offset is greater than or
> > + * equal to the reference value.
> > + */
> > +struct drm_msm_wait_iova {
> > + __u32 handle; /* in, GEM handle */
> > + __u32 pad;
> > + struct drm_msm_timespec timeout; /* in */
> > + __u64 offset; /* offset into bo */
> > + __u64 value; /* reference value */
>
> Any specific reason why we wouldn't just put the offset and value first and save
> ourselves the padding?

I'd actually like to have a pad must-be-zero flag to make this easier
to extend in the future, if needed.

(Maybe there is a use-case for a wait_iova that is scoped to a
specific submit-queue, or we want to add other types of tests beyond
GTE, etc)

BR,
-R


> > +};
> > +
> > #define DRM_MSM_GET_PARAM 0x00
> > /* placeholder:
> > #define DRM_MSM_SET_PARAM 0x01
> > @@ -315,6 +326,7 @@ struct drm_msm_submitqueue_query {
> > #define DRM_MSM_SUBMITQUEUE_NEW 0x0A
> > #define DRM_MSM_SUBMITQUEUE_CLOSE 0x0B
> > #define DRM_MSM_SUBMITQUEUE_QUERY 0x0C
> > +#define DRM_MSM_WAIT_IOVA 0x0D
> >
> > #define DRM_IOCTL_MSM_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GET_PARAM, struct drm_msm_param)
> > #define DRM_IOCTL_MSM_GEM_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_NEW, struct drm_msm_gem_new)
> > @@ -327,6 +339,7 @@ struct drm_msm_submitqueue_query {
> > #define DRM_IOCTL_MSM_SUBMITQUEUE_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_SUBMITQUEUE_NEW, struct drm_msm_submitqueue)
> > #define DRM_IOCTL_MSM_SUBMITQUEUE_CLOSE DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_SUBMITQUEUE_CLOSE, __u32)
> > #define DRM_IOCTL_MSM_SUBMITQUEUE_QUERY DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_SUBMITQUEUE_QUERY, struct drm_msm_submitqueue_query)
> > +#define DRM_IOCTL_MSM_WAIT_IOVA DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_WAIT_IOVA, struct drm_msm_wait_iova)
> >
> > #if defined(__cplusplus)
> > }
> > --
> > 2.25.0.rc1.283.g88dfdc4193-goog
> >
> > _______________________________________________
> > Freedreno mailing list
> > Freedreno@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/freedreno
>
> --
> The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2020-01-13 19:23    [W:0.114 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site