lkml.org 
[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Input: keyspan-remote: fix control-message timeouts
Date
The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on probe
due to a malfunctioning (or malicious) device until the device is
physically disconnected. While sleeping in probe the driver prevents
other devices connected to the same hub from being added to (or removed
from) the bus.

The USB upper limit of five seconds per request should be more than
enough.

Fixes: 99f83c9c9ac9 ("[PATCH] USB: add driver for Keyspan Digital Remote")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/input/misc/keyspan_remote.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index 83368f1e7c4e..4650f4a94989 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -336,7 +336,8 @@ static int keyspan_setup(struct usb_device* dev)
int retval = 0;

retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
+ 0x11, 0x40, 0x5601, 0x0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
if (retval) {
dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
__func__, retval);
@@ -344,7 +345,8 @@ static int keyspan_setup(struct usb_device* dev)
}

retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
+ 0x44, 0x40, 0x0, 0x0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
if (retval) {
dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
__func__, retval);
@@ -352,7 +354,8 @@ static int keyspan_setup(struct usb_device* dev)
}

retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
+ 0x22, 0x40, 0x0, 0x0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
if (retval) {
dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
__func__, retval);
--
2.24.1
\
 
 \ /
  Last update: 2020-01-13 18:17    [W:0.062 / U:1.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site