[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
On Mon, Jan 13, 2020 at 01:01:06PM +0000, John Garry wrote:
> On 13/01/2020 11:42, Mark Brown wrote:

> > The idiomatic approach appears to be for individual board vendors
> > to allocate IDs, you do end up with multiple IDs from multiple
> > vendors for the same thing.

> But I am not sure how appropriate that same approach would be for some 3rd
> party memory part which we're simply wiring up on our board. Maybe it is.

It seems to be quite common for Intel reference designs to assign
Intel IDs to non-Intel parts on the board (which is where I
became aware of this practice).

> > In general there's not really much standardizaiton for devices,
> > the bindings that do exist aren't really centrally documented and
> > the Windows standard is just to have the basic device
> > registration in the firmware and do all properties based on
> > quirking based on DMI information.

> OK, so there is always DMI. I hoped to avoid this sort of thing in the linux
> driver :)

Yes, there are some merits to an approach like that.
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2020-01-13 15:07    [W:0.113 / U:1.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site