[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
On 13/01/2020 11:42, Mark Brown wrote:
> On Mon, Jan 13, 2020 at 10:09:27AM +0000, John Garry wrote:
>> On 10/01/2020 19:31, Andy Shevchenko wrote:
>>> PRP method is only for vendors to *test* the hardware in ACPI environment.
>>> The proper method is to allocate correct ACPI ID.
>> Yes, that would seem the proper thing to do. So the SPI NOR driver is based
>> on micron m25p80 and compatible string is "jedec,spi-nor", so I don't know
>> who should or would do this registration.

Hi Mark,

> The idiomatic approach appears to be for individual board vendors
> to allocate IDs, you do end up with multiple IDs from multiple
> vendors for the same thing.

So we see sort of approach a lot when vendors integrate 3rd party IP
into a SoC and then assign some vendor specific ID for that.

But I am not sure how appropriate that same approach would be for some
3rd party memory part which we're simply wiring up on our board. Maybe
it is.

>> BTW, Do any of these sensors you mention have any ACPI standardization?
> In general there's not really much standardizaiton for devices,
> the bindings that do exist aren't really centrally documented and
> the Windows standard is just to have the basic device
> registration in the firmware and do all properties based on
> quirking based on DMI information.

OK, so there is always DMI. I hoped to avoid this sort of thing in the
linux driver :)


 \ /
  Last update: 2020-01-13 14:02    [W:0.092 / U:27.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site