lkml.org 
[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2] HID: logitech-hidpp: add support for the Powerplay mat/receiver
From
Date
On Tue, 2020-01-14 at 21:03 +1000, Benjamin Tissoires wrote:
> Hi Filipe,
>
> On Mon, Jan 13, 2020 at 8:07 AM Filipe Laíns <lains@archlinux.org> wrote:
> > The Logitech G Powerplay has a lightspeed receiver with a static HID++
> > device with ID 7 attached to it to. It is used to configure the led on
> > the mat. For this reason I increased the max number of devices.
> >
> > I also marked all lightspeed devices as HID++ compatible. As the
> > internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> > REPORT_TYPE_MOUSE it was not being marked as HID++ compatible in
> > logi_hidpp_dev_conn_notif_equad.
> >
> > Signed-off-by: Filipe Laíns <lains@archlinux.org>
> > ---
> > drivers/hid/hid-logitech-dj.c | 10 +++++++---
> > 1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
> > index bb50d6e7745b..732380b55b15 100644
> > --- a/drivers/hid/hid-logitech-dj.c
> > +++ b/drivers/hid/hid-logitech-dj.c
> > @@ -16,11 +16,11 @@
> > #include <asm/unaligned.h>
> > #include "hid-ids.h"
> >
> > -#define DJ_MAX_PAIRED_DEVICES 6
> > +#define DJ_MAX_PAIRED_DEVICES 7
> > #define DJ_MAX_NUMBER_NOTIFS 8
> > #define DJ_RECEIVER_INDEX 0
> > #define DJ_DEVICE_INDEX_MIN 1
> > -#define DJ_DEVICE_INDEX_MAX 6
> > +#define DJ_DEVICE_INDEX_MAX 7
> >
> > #define DJREPORT_SHORT_LENGTH 15
> > #define DJREPORT_LONG_LENGTH 32
> > @@ -971,7 +971,7 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
> > case 0x0c:
> > device_type = "eQUAD Lightspeed 1";
> > logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
> > - workitem.reports_supported |= STD_KEYBOARD;
> > + workitem.reports_supported |= STD_KEYBOARD | HIDPP;
>
> This feels wrong. The whole initial code was hack-ish, and now this is
> even more hack-ish.
>
> I don't have a simple solution right now (at a conference this week),
> but I will need to be convinced this is the only sane solution :/
>
> Cheers,
> Benjamin

Yeah, I understand. I just addressed this in a reply to the previous
patch:

On Tue, 2020-01-14 at 00:55 +0000, Filipe Laíns wrote:
> Okay, then is maybe better if I add HIDPP to reports_supported based
> on
> the device ID (7). This is the only product to my knowledge that
> exports a device with ID 7. It's a better solution than setting HIDPP
> on all lightspeed devices.
>
> I will send a new patch if you agree with this approach.

What do you think?

Maybe we will have to rework the driver but the method I proposed above
doesn't seem that hack-ish, at least considering the current code :P

> > break;
> > case 0x0d:
> > device_type = "eQUAD Lightspeed 1_1";
> > @@ -1850,6 +1850,10 @@ static const struct hid_device_id
> > logi_dj_receivers[] = {
> > HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1
> > ),
> > .driver_data = recvr_type_gaming_hidpp},
> > + { /* Logitech powerplay mat/receiver (0xc539) */
> > + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > + 0xc53a),
> > + .driver_data = recvr_type_gaming_hidpp},
> > { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
> > HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > USB_DEVICE_ID_MX3000_RECEIVER),
> > .driver_data = recvr_type_27mhz},
> > --
> > 2.24.1
> >
--
Filipe Laíns
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-01-14 02:11    [W:0.054 / U:3.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site