lkml.org 
[lkml]   [2020]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
On Sun, Jan 12, 2020 at 12:18 PM Gabriel C <nix.or.die@gmail.com> wrote:

> What I've noticed however is the nvme temperature low/high values on
> the Sensors X are strange here.
(...)
> Sensor 1: +27.9°C (low = -273.1°C, high = +65261.8°C)
> Sensor 2: +29.9°C (low = -273.1°C, high = +65261.8°C)
(...)
> Sensor 1: +23.9°C (low = -273.1°C, high = +65261.8°C)
> Sensor 2: +25.9°C (low = -273.1°C, high = +65261.8°C)

That doesn't look strange to me. It seems like reasonable defaults
from the firmware if either it doesn't really log the min/max temperatures
or hasn't been through a cycle of updating these yet. Just set both
to absolute min/max temperatures possible.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2020-01-12 12:23    [W:2.248 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site