[lkml]   [2020]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
On 10/01/2020 15:12, Mark Brown wrote:
> On Fri, Jan 10, 2020 at 02:58:54PM +0000, John Garry wrote:
>> On 10/01/2020 14:07, Mark Brown wrote:
>>> On Fri, Jan 10, 2020 at 11:55:37AM +0000, John Garry wrote: >

Hi Mark,

>>> OK, so that's just reusing the DT binding in which case everything
>>> that's valid for the DT binding should also be valid for ACPI - I
>>> thought that actually worked automatically without you having to do
>>> anything in the code but ICBW.
>> I thought that it would be improper as we could be mixing ACPI methods to
>> describe the serial bus (SPI Serial Bus Connection Resource Descriptor) and
>> also DT properties which could conflict, like CS active high.
> Yes, that's one of the issues with importing bits of DT into ACPI
> unfortunately - you will get conflicts, it's not clear it's a good idea
> to be using PRP0001 for SPI stuff given that there's bus level bindings
> for both ACPI and SPI and they don't line up exactly.

Yeah, I'm not entirely comfortable with this yet.

>> However I do see extra properties than "compatible" being added in DSD for
>> PRP0001:
>> (see EEPROM part)
>> And if we were to do this, I think that we would need to add some
>> device_property_read_u32("spi-rx-bus-width", ...), etc calls in the SPI FW
>> parsing for ACPI path - I couldn't see that.
> You'd need parsing code, yes.

I'll continue to check the options.


 \ /
  Last update: 2020-01-10 17:09    [W:0.109 / U:3.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site