[lkml]   [2020]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
On Fri, Jan 10, 2020 at 02:58:54PM +0000, John Garry wrote:
> On 10/01/2020 14:07, Mark Brown wrote:
> > On Fri, Jan 10, 2020 at 11:55:37AM +0000, John Garry wrote: >

> > OK, so that's just reusing the DT binding in which case everything
> > that's valid for the DT binding should also be valid for ACPI - I
> > thought that actually worked automatically without you having to do
> > anything in the code but ICBW.

> I thought that it would be improper as we could be mixing ACPI methods to
> describe the serial bus (SPI Serial Bus Connection Resource Descriptor) and
> also DT properties which could conflict, like CS active high.

Yes, that's one of the issues with importing bits of DT into ACPI
unfortunately - you will get conflicts, it's not clear it's a good idea
to be using PRP0001 for SPI stuff given that there's bus level bindings
for both ACPI and SPI and they don't line up exactly.

> However I do see extra properties than "compatible" being added in DSD for
> PRP0001:
> (see EEPROM part)

> And if we were to do this, I think that we would need to add some
> device_property_read_u32("spi-rx-bus-width", ...), etc calls in the SPI FW
> parsing for ACPI path - I couldn't see that.

You'd need parsing code, yes.
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2020-01-10 16:12    [W:0.106 / U:4.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site