lkml.org 
[lkml]   [2020]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC][PATCH 12/15] videobuf2: add begin/end cpu_access callbacks to dma-sg
From
Date
On 12/17/19 4:20 AM, Sergey Senozhatsky wrote:
> Provide begin_cpu_access() and end_cpu_access() dma_buf_ops
> callbacks for cache synchronisation on exported buffers.
>
> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
> ---
> .../media/common/videobuf2/videobuf2-dma-sg.c | 22 +++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/media/common/videobuf2/videobuf2-dma-sg.c b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
> index 6db60e9d5183..bfc99a0cb7b9 100644
> --- a/drivers/media/common/videobuf2/videobuf2-dma-sg.c
> +++ b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
> @@ -470,6 +470,26 @@ static void vb2_dma_sg_dmabuf_ops_release(struct dma_buf *dbuf)
> vb2_dma_sg_put(dbuf->priv);
> }
>

There is no corresponding vb2_sg_buffer_consistent function here.

Looking more closely I see that vb2_dma_sg_alloc doesn't pass the dma_attrs
argument to dma_map_sg_attrs, thus V4L2_FLAG_MEMORY_NON_CONSISTENT has no
effect on dma-sg buffers.

Is there a reason why dma_attrs isn't passed on to dma_map_sg_attrs()?

I suspect it was just laziness in the past, and that it should be wired
up, just as for dma-contig.

Regards,

Hans

> +static int vb2_dma_sg_dmabuf_ops_begin_cpu_access(struct dma_buf *dbuf,
> + enum dma_data_direction direction)
> +{
> + struct vb2_dma_sg_buf *buf = dbuf->priv;
> + struct sg_table *sgt = buf->dma_sgt;
> +
> + dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
> + return 0;
> +}
> +
> +static int vb2_dma_sg_dmabuf_ops_end_cpu_access(struct dma_buf *dbuf,
> + enum dma_data_direction direction)
> +{
> + struct vb2_dma_sg_buf *buf = dbuf->priv;
> + struct sg_table *sgt = buf->dma_sgt;
> +
> + dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
> + return 0;
> +}
> +
> static void *vb2_dma_sg_dmabuf_ops_vmap(struct dma_buf *dbuf)
> {
> struct vb2_dma_sg_buf *buf = dbuf->priv;
> @@ -488,6 +508,8 @@ static const struct dma_buf_ops vb2_dma_sg_dmabuf_ops = {
> .detach = vb2_dma_sg_dmabuf_ops_detach,
> .map_dma_buf = vb2_dma_sg_dmabuf_ops_map,
> .unmap_dma_buf = vb2_dma_sg_dmabuf_ops_unmap,
> + .begin_cpu_access = vb2_dma_sg_dmabuf_ops_begin_cpu_access,
> + .end_cpu_access = vb2_dma_sg_dmabuf_ops_end_cpu_access,
> .vmap = vb2_dma_sg_dmabuf_ops_vmap,
> .mmap = vb2_dma_sg_dmabuf_ops_mmap,
> .release = vb2_dma_sg_dmabuf_ops_release,
>

\
 
 \ /
  Last update: 2020-01-10 11:14    [W:0.196 / U:9.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site