lkml.org 
[lkml]   [2019]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: uniphier: Add Pro5 USB3 VBUS support
Date
Pro5 SoC has same scheme of USB3 VBUS as Pro4, so the data for Pro5 is
equivalent to Pro4.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
Documentation/devicetree/bindings/regulator/uniphier-regulator.txt | 5 +++--
drivers/regulator/uniphier-regulator.c | 4 ++++
2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
index c9919f4..94fd38b 100644
--- a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
@@ -13,6 +13,7 @@ this layer. These clocks and resets should be described in each property.
Required properties:
- compatible: Should be
"socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
+ "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
"socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
"socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
"socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
@@ -20,12 +21,12 @@ Required properties:
- clocks: A list of phandles to the clock gate for USB3 glue layer.
According to the clock-names, appropriate clocks are required.
- clock-names: Should contain
- "gio", "link" - for Pro4 SoC
+ "gio", "link" - for Pro4 and Pro5 SoCs
"link" - for others
- resets: A list of phandles to the reset control for USB3 glue layer.
According to the reset-names, appropriate resets are required.
- reset-names: Should contain
- "gio", "link" - for Pro4 SoC
+ "gio", "link" - for Pro4 and Pro5 SoCs
"link" - for others

See Documentation/devicetree/bindings/regulator/regulator.txt
diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
index 9026d5a..2311924 100644
--- a/drivers/regulator/uniphier-regulator.c
+++ b/drivers/regulator/uniphier-regulator.c
@@ -186,6 +186,10 @@ static const struct of_device_id uniphier_regulator_match[] = {
.data = &uniphier_pro4_usb3_data,
},
{
+ .compatible = "socionext,uniphier-pro5-usb3-regulator",
+ .data = &uniphier_pro4_usb3_data,
+ },
+ {
.compatible = "socionext,uniphier-pxs2-usb3-regulator",
.data = &uniphier_pxs2_usb3_data,
},
--
2.7.4
\
 
 \ /
  Last update: 2019-09-10 03:52    [W:0.059 / U:3.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site