lkml.org 
[lkml]   [2019]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
Hi,

* H. Nikolaus Schaller <hns@goldelico.com> [190909 14:57]:
> Another question that came up by private mail from André was if we
> should better disable the turbo OPPs of omap34xx and 36xx by default
> (status = "disabled";) because there are concerns about overheating
> the chips and we have no thermal regulation like for omap4 & 5.
>
> But this would mean that every board DTS would have to set it explicitly
> to "enabled".

Yes I started thinking about that too. I think there is a requirement
to do the scaling via the voltage processor for the higher modes.
And there needs to be some way to automatically change to a lower
OPP in some cases.

For normal OPPs, using the twl regulator directly should be OK.

For the higher modes, maybe we could pass the callback functions
from arch/arm/mach-omap2/voltage.c for the twl regulator so the
voltage processor hardware can handle them directly. Or add a
separate regulator driver operating the voltages like Nishanth
posted patches for earlier.

Regards,

Tony

\
 
 \ /
  Last update: 2019-09-09 18:32    [W:0.066 / U:1.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site