lkml.org 
[lkml]   [2019]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch 01/13] media: am437x-vpfe: Fix suspend path to always handle pinctrl config
Date
From: Dave Gerlach <d-gerlach@ti.com>

Currently if vpfe is not active then it returns immediately in the
suspend and resume handlers. Change this so that it always performs the
pinctrl config so that we can still get proper sleep state configuration
on the pins even if we do not need to worry about fully saving and
restoring context.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
drivers/media/platform/am437x/am437x-vpfe.c | 44 ++++++++++-----------
1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
index 2b42ba1f5949..ab959d61f9c9 100644
--- a/drivers/media/platform/am437x/am437x-vpfe.c
+++ b/drivers/media/platform/am437x/am437x-vpfe.c
@@ -2653,22 +2653,22 @@ static int vpfe_suspend(struct device *dev)
struct vpfe_device *vpfe = dev_get_drvdata(dev);
struct vpfe_ccdc *ccdc = &vpfe->ccdc;

- /* if streaming has not started we don't care */
- if (!vb2_start_streaming_called(&vpfe->buffer_queue))
- return 0;
+ /* only do full suspend if streaming has started */
+ if (vb2_start_streaming_called(&vpfe->buffer_queue)) {

- pm_runtime_get_sync(dev);
- vpfe_config_enable(ccdc, 1);
+ pm_runtime_get_sync(dev);
+ vpfe_config_enable(ccdc, 1);

- /* Save VPFE context */
- vpfe_save_context(ccdc);
+ /* Save VPFE context */
+ vpfe_save_context(ccdc);

- /* Disable CCDC */
- vpfe_pcr_enable(ccdc, 0);
- vpfe_config_enable(ccdc, 0);
+ /* Disable CCDC */
+ vpfe_pcr_enable(ccdc, 0);
+ vpfe_config_enable(ccdc, 0);

- /* Disable both master and slave clock */
- pm_runtime_put_sync(dev);
+ /* Disable both master and slave clock */
+ pm_runtime_put_sync(dev);
+ }

/* Select sleep pin state */
pinctrl_pm_select_sleep_state(dev);
@@ -2710,19 +2710,19 @@ static int vpfe_resume(struct device *dev)
struct vpfe_device *vpfe = dev_get_drvdata(dev);
struct vpfe_ccdc *ccdc = &vpfe->ccdc;

- /* if streaming has not started we don't care */
- if (!vb2_start_streaming_called(&vpfe->buffer_queue))
- return 0;
+ /* only do full resume if streaming has started */
+ if (vb2_start_streaming_called(&vpfe->buffer_queue)) {

- /* Enable both master and slave clock */
- pm_runtime_get_sync(dev);
- vpfe_config_enable(ccdc, 1);
+ /* Enable both master and slave clock */
+ pm_runtime_get_sync(dev);
+ vpfe_config_enable(ccdc, 1);

- /* Restore VPFE context */
- vpfe_restore_context(ccdc);
+ /* Restore VPFE context */
+ vpfe_restore_context(ccdc);

- vpfe_config_enable(ccdc, 0);
- pm_runtime_put_sync(dev);
+ vpfe_config_enable(ccdc, 0);
+ pm_runtime_put_sync(dev);
+ }

/* Select default pin state */
pinctrl_pm_select_default_state(dev);
--
2.17.1
\
 
 \ /
  Last update: 2019-09-09 18:26    [W:0.228 / U:1.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site