lkml.org 
[lkml]   [2019]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
On Mon, 2 Sep 2019 14:14:18 -0300
Marcelo Schmitt <marcelo.schmitt1@gmail.com> wrote:

> Hi Rodrigo,
>
> This dt doc looks overal fine IMHO.
> I would just add some inline comments about the cpha and cpol
> properties.
>
> On 09/01, Rodrigo Carvalho wrote:
> > This patch add device tree binding documentation for ADIS16240.
> >
> > Signed-off-by: Rodrigo Ribeiro Carvalho <rodrigorsdc@gmail.com>
> > ---
> > I have doubt about what maintainer I may to put in that documentation. I
> > put Alexandru as maintainer because he reviewed my last patch on this
> > driver, so I think that he is a good candidate.
> > .../bindings/iio/accel/adi,adis16240.yaml | 55 +++++++++++++++++++
> > 1 file changed, 55 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> > new file mode 100644
> > index 000000000000..08019b51611c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> > @@ -0,0 +1,55 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ADIS16240 Programmable Impact Sensor and Recorder driver
> > +
> > +maintainers:
> > + - Alexandru Ardelean <alexandru.ardelean@analog.com>
> > +
> > +description: |
> > + ADIS16240 Programmable Impact Sensor and Recorder driver that supports
> > + SPI interface.
> > + https://www.analog.com/en/products/adis16240.html
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - adi,adis16240
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + spi-cpha: true
> > +
> > + spi-cpol: true
> Boolean properties don't require to be explicitly set. It would also be
> nice to add a description pointing to the spi-bus documentation. Like
> this:
>
> spi-cpha:
> description: |
> See Documentation/devicetree/bindings/spi/spi-bus.txt
> maxItems: 1
>
> spi-cpol:
> description: |
> See Documentation/devicetree/bindings/spi/spi-bus.txt
> maxItems: 1
>
> As far as I know, spi-cpol and spi-cpha stand for SPI chip polarity and
> SPI chip phase respectively. By default, it is assumed that SPI
> input/output data is available at uprising clock edges, however, some
> chips may work with different configuration (taking input data and/or
> push it out in falling edges). I'm not 100% sure but, from what I've
> seen on IIO, cpol is set to invert the input/output logic (making IO be
> taken on falling edges) while cpha is usually set when MISO valid out
> data is available on SCLK falling edge. If anyone has more comments
> about this please, add them here, I'm curious about it. :)
>

They may well be constant for a given device (some will cope with
several combinations). So the binding should reflect if they 'must'
be set.

Adding the cross reference is indeed nice.

Jonathan

> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + spi0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + /* Example for a SPI device node */
> > + accelerometer@0 {
> > + compatible = "adi,adis16240";
> > + reg = <0>;
> > + spi-max-frequency = <2500000>;
> > + spi-cpol;
> > + spi-cpha;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > + };
> > --
> > 2.23.0.rc1
> >
> > --
> > You received this message because you are subscribed to the Google Groups "Kernel USP" group.
> > To unsubscribe from this group and stop receiving emails from it, send an email to kernel-usp+unsubscribe@googlegroups.com.
> > To view this discussion on the web visit https://groups.google.com/d/msgid/kernel-usp/20190902005938.7734-1-rodrigorsdc%40gmail.com.

\
 
 \ /
  Last update: 2019-09-08 12:52    [W:0.072 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site