[lkml]   [2019]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v2 03/11] mmc: mtk-sd: Re-store SDIO IRQs mask at system resume
In cases when SDIO IRQs have been enabled, runtime suspend is prevented by
the driver. However, this still means msdc_runtime_suspend|resume() gets
called during system suspend/resume, via pm_runtime_force_suspend|resume().

This means during system suspend/resume, the register context of the mtk-sd
device most likely loses its register context, even in cases when SDIO IRQs
have been enabled.

To re-enable the SDIO IRQs during system resume, the mtk-sd driver
currently relies on the mmc core to re-enable the SDIO IRQs when it resumes
the SDIO card, but this isn't the recommended solution. Instead, it's
better to deal with this locally in the mtk-sd driver, so let's do that.

Signed-off-by: Ulf Hansson <>
drivers/mmc/host/mtk-sd.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 6946bb040a28..ae7688098b7b 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -2408,6 +2408,9 @@ static void msdc_save_reg(struct msdc_host *host)
} else {
host->save_para.pad_tune = readl(host->base + tune_reg);
+ if (sdio_irq_claimed(host->mmc))
+ __msdc_enable_sdio_irq(host, 1);

static void msdc_restore_reg(struct msdc_host *host)
 \ /
  Last update: 2019-09-08 12:13    [W:0.123 / U:2.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site