lkml.org 
[lkml]   [2019]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] watchdog: pm8916_wdt: fix pretimeout registration flow
From
Date
On 9/6/19 1:30 PM, Jorge Ramirez-Ortiz wrote:
> When an IRQ is present in the dts, the probe function shall fail if
> the interrupt can not be registered.
>

The author intended differently, and did not want registration to fail
in this situation, following the logic that it is better to have a
standard watchdog without pretimeout than no watchdog at all.

Copying the author; I am not inclined to accept such a change without
input from the driver author.

Similar, for the deferred probe, we'll need to know from the driver author
if this is a concern. In general it is, but there are cases where
-EPROBE_DEFFER is never returned in practice (eg for some SoC watchdog
drivers).

Guenter

> The probe function shall also be retried if getting the irq is being
> deferred.
>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> ---
> drivers/watchdog/pm8916_wdt.c | 16 ++++++++++++----
> 1 file changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/watchdog/pm8916_wdt.c b/drivers/watchdog/pm8916_wdt.c
> index 2d3652004e39..cb5304c26ac3 100644
> --- a/drivers/watchdog/pm8916_wdt.c
> +++ b/drivers/watchdog/pm8916_wdt.c
> @@ -163,9 +163,18 @@ static int pm8916_wdt_probe(struct platform_device *pdev)
>
> irq = platform_get_irq(pdev, 0);
> if (irq > 0) {
> - if (devm_request_irq(dev, irq, pm8916_wdt_isr, 0, "pm8916_wdt",
> - wdt))
> - irq = 0;
> + err = devm_request_irq(dev, irq, pm8916_wdt_isr, 0,
> + "pm8916_wdt", wdt);
> + if (err)
> + return err;
> +
> + wdt->wdev.info = &pm8916_wdt_pt_ident;
> +
> + } else {
> + if (irq == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + wdt->wdev.info = &pm8916_wdt_ident;
> }
>
> /* Configure watchdog to hard-reset mode */
> @@ -177,7 +186,6 @@ static int pm8916_wdt_probe(struct platform_device *pdev)
> return err;
> }
>
> - wdt->wdev.info = (irq > 0) ? &pm8916_wdt_pt_ident : &pm8916_wdt_ident,
> wdt->wdev.ops = &pm8916_wdt_ops,
> wdt->wdev.parent = dev;
> wdt->wdev.min_timeout = PM8916_WDT_MIN_TIMEOUT;
>

\
 
 \ /
  Last update: 2019-09-09 00:52    [W:0.058 / U:1.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site