lkml.org 
[lkml]   [2019]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] phy: meson-g12a-usb3-pcie: Add support for PCIe mode
Date
This adds extended PCIe PHY functions for the Amlogic G12A
USB3+PCIE Combo PHY to support reset, power_on and power_off for
PCIe exclusively.

With these callbacks, we can handle all the needed operations of the
Amlogic PCIe controller driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../phy/amlogic/phy-meson-g12a-usb3-pcie.c | 70 ++++++++++++++++---
1 file changed, 61 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
index ac322d643c7a..08e322789e59 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -50,6 +50,8 @@
#define PHY_R5_PHY_CR_ACK BIT(16)
#define PHY_R5_PHY_BS_OUT BIT(17)

+#define PCIE_RESET_DELAY 500
+
struct phy_g12a_usb3_pcie_priv {
struct regmap *regmap;
struct regmap *regmap_cr;
@@ -196,6 +198,10 @@ static int phy_g12a_usb3_init(struct phy *phy)
struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
int data, ret;

+ ret = reset_control_reset(priv->reset);
+ if (ret)
+ return ret;
+
/* Switch PHY to USB3 */
/* TODO figure out how to handle when PCIe was set in the bootloader */
regmap_update_bits(priv->regmap, PHY_R0,
@@ -272,24 +278,64 @@ static int phy_g12a_usb3_init(struct phy *phy)
return 0;
}

-static int phy_g12a_usb3_pcie_init(struct phy *phy)
+static int phy_g12a_usb3_pcie_power_on(struct phy *phy)
+{
+ struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+ if (priv->mode == PHY_TYPE_USB3)
+ return 0;
+
+ regmap_update_bits(priv->regmap, PHY_R0,
+ PHY_R0_PCIE_POWER_STATE,
+ FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
+
+ return 0;
+}
+
+static int phy_g12a_usb3_pcie_power_off(struct phy *phy)
+{
+ struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+ if (priv->mode == PHY_TYPE_USB3)
+ return 0;
+
+ regmap_update_bits(priv->regmap, PHY_R0,
+ PHY_R0_PCIE_POWER_STATE,
+ FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1d));
+
+ return 0;
+}
+
+static int phy_g12a_usb3_pcie_reset(struct phy *phy)
{
struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
int ret;

- ret = reset_control_reset(priv->reset);
+ if (priv->mode == PHY_TYPE_USB3)
+ return 0;
+
+ ret = reset_control_assert(priv->reset);
if (ret)
return ret;

+ udelay(PCIE_RESET_DELAY);
+
+ ret = reset_control_deassert(priv->reset);
+ if (ret)
+ return ret;
+
+ udelay(PCIE_RESET_DELAY);
+
+ return 0;
+}
+
+static int phy_g12a_usb3_pcie_init(struct phy *phy)
+{
+ struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
if (priv->mode == PHY_TYPE_USB3)
return phy_g12a_usb3_init(phy);

- /* Power UP PCIE */
- /* TODO figure out when the bootloader has set USB3 mode before */
- regmap_update_bits(priv->regmap, PHY_R0,
- PHY_R0_PCIE_POWER_STATE,
- FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
-
return 0;
}

@@ -297,7 +343,10 @@ static int phy_g12a_usb3_pcie_exit(struct phy *phy)
{
struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);

- return reset_control_reset(priv->reset);
+ if (priv->mode == PHY_TYPE_USB3)
+ return reset_control_reset(priv->reset);
+
+ return 0;
}

static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev,
@@ -326,6 +375,9 @@ static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev,
static const struct phy_ops phy_g12a_usb3_pcie_ops = {
.init = phy_g12a_usb3_pcie_init,
.exit = phy_g12a_usb3_pcie_exit,
+ .power_on = phy_g12a_usb3_pcie_power_on,
+ .power_off = phy_g12a_usb3_pcie_power_off,
+ .reset = phy_g12a_usb3_pcie_reset,
.owner = THIS_MODULE,
};

--
2.17.1
\
 
 \ /
  Last update: 2019-09-08 15:44    [W:0.155 / U:4.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site