lkml.org 
[lkml]   [2019]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] net: phy: dp83867: Add documentation for SGMII mode type
On Thu, Sep 05, 2019 at 07:26:00PM +0300, Vitaly Gaiduk wrote:
> Add documentation of ti,sgmii-type which can be used to select
> SGMII mode type (4 or 6-wire).
>
> Signed-off-by: Vitaly Gaiduk <vitaly.gaiduk@cloudbear.ru>
> ---
> Documentation/devicetree/bindings/net/ti,dp83867.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
> index db6aa3f2215b..18e7fd52897f 100644
> --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
> +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
> @@ -37,6 +37,7 @@ Optional property:
> for applicable values. The CLK_OUT pin can also
> be disabled by this property. When omitted, the
> PHY's default will be left as is.
> + - ti,sgmii-type - This denotes the fact which SGMII mode is used (4 or 6-wire).

Hi Vitaly

You probably want to make this a Boolean. I don't think SGMII type is
a good idea. This is about enabling the receive clock to be passed to
the MAC. So how about ti,sgmii-ref-clock-output-enable.

Andrew

\
 
 \ /
  Last update: 2019-09-07 17:41    [W:0.174 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site