lkml.org 
[lkml]   [2019]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 4/4] arm64: dts: add support for A1 based Amlogic AD401
Hi Jianxin,

On Fri, Sep 6, 2019 at 7:58 AM Jianxin Pan <jianxin.pan@amlogic.com> wrote:
[...]
> > also I'm a bit surprised to see no busses (like aobus, cbus, periphs, ...) here
> > aren't there any busses defined in the A1 SoC implementation or are
> > were you planning to add them later?
> Unlike previous series,there is no Cortex-M3 AO CPU in A1, and there is no AO/EE power domain.
> Most of the registers are on the apb_32b bus. aobus, cbus and periphs are not used in A1.
OK, thank you for the explanation
since you're going to re-send the patch anyways: can you please
include the apb_32b bus?
all other upstream Amlogic .dts are using the bus definitions, so that
will make A1 consistent with the other SoCs


Martin

\
 
 \ /
  Last update: 2019-09-07 17:03    [W:0.168 / U:21.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site