lkml.org 
[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] watchdog: qcom: support pre-timeout when the bark irq is available
On Fri, Sep 06, 2019 at 10:40:09AM -0700, Bjorn Andersson wrote:
> On Thu 05 Sep 14:00 PDT 2019, Jorge Ramirez-Ortiz wrote:
> > diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
> [..]
> > +static inline int qcom_get_enable(struct watchdog_device *wdd)
> > +{
> > + int enable = QCOM_WDT_ENABLE;
> > +
> > + if (wdd->info->options & WDIOF_PRETIMEOUT)
> > + enable |= QCOM_WDT_ENABLE_IRQ;
>
> Looking at downstream they conditionally write 3 to WDT_EN during
> initialization, but during suspend/resume they just set it to back to 1.
>
Looks like a bug to me.

Either case, per API, pretimeout is enabled with the value of pretimeout,
not with interrupt information from DT. I am not inclined to accept the
above condition for enabling it.

> So I don't think you should touch BIT(1) (which name doesn't match
> downstream or the register documentation)
>

You mean touching bit 1 is wrong to start with, and it is not a bit used
to enable the interrupt (and thus pretimeout) ?

Guess I'll need to dig out the manual myself.

Guenter

\
 
 \ /
  Last update: 2019-09-06 21:10    [W:0.064 / U:31.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site