lkml.org 
[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] drm/panfrost: Fix regulator_get_optional() misuse
Date
On 04/09/2019 13:30, Mark Brown wrote:
> The panfrost driver requests a supply using regulator_get_optional()
> but both the name of the supply and the usage pattern suggest that it is
> being used for the main power for the device and is not at all optional
> for the device for function, there is no meaningful handling for absent
> supplies. Such regulators should use the vanilla regulator_get()
> interface, it will ensure that even if a supply is not described in the
> system integration one will be provided in software.
>
> Signed-off-by: Mark Brown <broonie@kernel.org>

Tested-by: Steven Price <steven.price@arm.com>

Looks like my approach to this was wrong - so we should also revert the
changes I made previously.

----8<----
From fe20f8abcde8444bb41a8f72fb35de943a27ec5c Mon Sep 17 00:00:00 2001
From: Steven Price <steven.price@arm.com>
Date: Fri, 6 Sep 2019 15:20:53 +0100
Subject: [PATCH] drm/panfrost: Revert changes to cope with NULL regulator

Handling a NULL return from devm_regulator_get_optional() doesn't seem
like the correct way of handling this. Instead revert the changes in
favour of switching to using devm_regulator_get() which will return a
dummy regulator instead.

Reverts commit 52282163dfa6 ("drm/panfrost: Add missing check for pfdev->regulator")
Reverts commit e21dd290881b ("drm/panfrost: Enable devfreq to work without regulator")

Signed-off-by: Steven Price <steven.price@arm.com>
---
drivers/gpu/drm/panfrost/panfrost_devfreq.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index a1f5fa6a742a..076983071e58 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -39,7 +39,7 @@ static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
* If frequency scaling from low to high, adjust voltage first.
* If frequency scaling from high to low, adjust frequency first.
*/
- if (old_clk_rate < target_rate && pfdev->regulator) {
+ if (old_clk_rate < target_rate) {
err = regulator_set_voltage(pfdev->regulator, target_volt,
target_volt);
if (err) {
@@ -53,14 +53,12 @@ static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
if (err) {
dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate,
err);
- if (pfdev->regulator)
- regulator_set_voltage(pfdev->regulator,
- pfdev->devfreq.cur_volt,
- pfdev->devfreq.cur_volt);
+ regulator_set_voltage(pfdev->regulator, pfdev->devfreq.cur_volt,
+ pfdev->devfreq.cur_volt);
return err;
}

- if (old_clk_rate > target_rate && pfdev->regulator) {
+ if (old_clk_rate > target_rate) {
err = regulator_set_voltage(pfdev->regulator, target_volt,
target_volt);
if (err)
@@ -138,6 +136,9 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
int ret;
struct dev_pm_opp *opp;

+ if (!pfdev->regulator)
+ return 0;
+
ret = dev_pm_opp_of_add_table(&pfdev->pdev->dev);
if (ret == -ENODEV) /* Optional, continue without devfreq */
return 0;
--
2.20.1
\
 
 \ /
  Last update: 2019-09-06 17:24    [W:0.074 / U:2.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site