lkml.org 
[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/5] gpio/aspeed: Fix incorrect number of banks
Date
The current calculation for the number of GPIO banks is only correct if
the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would
currently say there are 0 banks, which is incorrect).

Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver')

Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
drivers/gpio/gpio-aspeed.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 9defe25d4721..b83e23aecd18 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -1165,7 +1165,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
gpio->chip.base = -1;

/* Allocate a cache of the output registers */
- banks = gpio->config->nr_gpios >> 5;
+ banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32);
gpio->dcache = devm_kcalloc(&pdev->dev,
banks, sizeof(u32), GFP_KERNEL);
if (!gpio->dcache)
--
2.20.1
\
 
 \ /
  Last update: 2019-09-06 08:26    [W:0.034 / U:7.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site